Kikusui PBZ40-60BP Bi-Polar Power Supply ±0 to 40V / ±0 to 60A

Kikusui PBZ40-60BP Bi-Polar Power Supply ±0 to 40V / ±0 to 60A

. (£ inc VAT)

Available on back-order

Request QuoteRemove from Quote
Request Quote
Request QuoteRemove from Quote
Request Quote
SKU: PBZ40-60BP Category: Brand:

Description


Kikusui PBZ40-60BP Bi-Polar Power Supply

The PBZ BP series is a series of high-power bipolar DC stabilised power supplies. The PBZ BP series are designed based on the PBZ Intelligent Bipolar power supply series, that supports large currents (up to ±200 A) and is assembled with exclusive rack system (Smart Rack). The 4-quadrant operation allows the power to be supplied (source) or absorbed (sink), and it is suitable for driving inductive loads or capacitive loads. Also, the PBZ/BP series are equipped with LAN, USB, GPIB, and RS232C as standard communication interfaces.

Features:

  • Equipped with LAN Interface (LXI Compliance)
  • +/- 0-40V +/- 0-60A

Product Images

Product Videos

YouTube Video
PBZ Bipolar Power Supply Overview

    Standard Hardware Accessories

Documentation


Complicated waveform generation
Strict standard testing support
World-leading rapid response performance
Parallel Operation with Different Power Supply Models
PBZ Series: How to Change Pulse Width Using Sequence Function
How to Enable Positive/Negative Output from DC Power Supply
PBZ Series: How to Output Synchronised Square Wave from TRIG OUT Terminal
How to Measure Output Impedance of Power Supply with Bipolar Power Supply PBZ Series
Blown Fuse Testing Precautions When Using Electronic Load
Output Connection Methods with Parallel Control
Output On/Off Behaviour of PBZ Series
Using Bipolar Power Supply PBZ Series as AC Electronic Load
What It Takes to Keep Regulated DC Power Supply Stable Part 1: Connecting Cable
How to Select a Right DC Power Supply Part 2: Key Considerations
What It Takes to Keep Regulated DC Power Supply Stable Part 2: Load Conditions
What Makes a Good Power Supply?
DC Power Supply Sinks Current when Output is Turned Off
How to Balance Battery Module Charge-Discharge
Which Power Supply is Most Suitable to Run DC Motor?
How to Double Output Voltage from Two PBZ through BTL* Connection

AC Input, Rated Output
Model PBZ40-60 BP PBZ40-70 BP PBZ40-80 BP PBZ40-90 BP PBZ40-100 BP
Input Rating
Nominal input voltage 200 Vac to 240 Vac, single phase 200 Vac to 240 Vac, single phase 200 Vac to 240 Vac, single phase 200 Vac to 240 Vac, single phase 200 Vac, single phase
Voltage range 180 Vac to 250 Vac 180 Vac to 250 Vac 180 Vac to 250 Vac 180 Vac to 250 Vac 180 Vac to 220 Vac
Frequency range 47 Hz to 63 Hz 47 Hz to 63 Hz 47 Hz to 63 Hz 47 Hz to 63 Hz 47 Hz to 63 Hz
Current 30 Aac or less 35 Aac or less 40 Aac or less 45 Aac or less 50 Aac or less
Inrush current 240 Apeak or less 280 Apeak or less 320 Apeak or less 360 Apeak or less 400 Apeak or less
Power 5400 VA or less 6300 VA or less 7200 VA or less 8100 VA or less 9000 VA or less
Power factor 0.95 TYP (when the input voltage is 200 V) 0.95 TYP (when the input voltage is 200 V) 0.95 TYP (when the input voltage is 200 V) 0.95 TYP (when the input voltage is 200 V) 0.95 TYP (when the input voltage is 200 V)
Output rating
Power 2400W 2800W 3200W 3600W 4000W
Voltage ± 40 V ± 40 V ± 40 V ± 40 V ± 40 V
Current ± 60 A ± 70 A ± 80 A ± 90 A ± 100 A
Output terminal
Output terminal Rear-panel output terminals (OUTPUT1, OUTPUT2) Rear-panel output terminals (OUTPUT1, OUTPUT2) Rear-panel output terminals (OUTPUT1, OUTPUT2) Rear-panel output terminals (OUTPUT1, OUTPUT2) Rear-panel output terminals (OUTPUT1, OUTPUT2)
Isolation voltage 300 Vdc Only the output’s COM terminal can be grounded. 300 Vdc Only the output’s COM terminal can be grounded. 300 Vdc Only the output’s COM terminal can be grounded. 300 Vdc Only the output’s COM terminal can be grounded. 300 Vdc Only the output’s COM terminal can be grounded.
Constant Voltage (CV)
DC Voltage
Bipolar mode 0 V to ± (105 % of rating) 0 V to ± (105 % of rating) 0 V to ± (105 % of rating) 0 V to ± (105 % of rating) 0 V to ± (105 % of rating)
Unipolar mode 0 V to ± (105 % of rating) 0 V to ± (105 % of rating) 0 V to ± (105 % of rating) 0 V to ± (105 % of rating) 0 V to ± (105 % of rating)
Fine feature ±5 % of rating ±5 % of rating ±5 % of rating ±5 % of rating ±5 % of rating
Resolution 0.001 V (0.0001 V for the fine feature) 0.001 V (0.0001 V for the fine feature) 0.001 V (0.0001 V for the fine feature) 0.001 V (0.0001 V for the fine feature) 0.001 V (0.0001 V for the fine feature)
Accuracy ± (0.05 % of setting + 0.05 % of rating) ± (0.05 % of setting + 0.05 % of rating) ± (0.05 % of setting + 0.05 % of rating) ± (0.05 % of setting + 0.05 % of rating) ± (0.05 % of setting + 0.05 % of rating)
Temperature coefficient ± 100 ppm / °C of rating (TYP) ± 100 ppm / °C of rating (TYP) ± 100 ppm / °C of rating (TYP) ± 100 ppm / °C of rating (TYP) ± 100 ppm / °C of rating (TYP)
AC Voltage
Settable range 0.00 Vp-p to (210 % of rating) p-p 0.00 Vp-p to (210 % of rating) p-p 0.00 Vp-p to (210 % of rating) p-p 0.00 Vp-p to (210 % of rating) p-p 0.00 Vp-p to (210 % of rating) p-p
Resolution 0.1 V 0.1 V 0.1 V 0.1 V 0.1 V
Accuracy ± 0.5% of rating ± 0.5% of rating ± 0.5% of rating ± 0.5% of rating ± 0.5% of rating
Settable range 0.01 Hz to 100.00 kHz 0.01 Hz to 100.00 kHz 0.01 Hz to 100.00 kHz 0.01 Hz to 100.00 kHz 0.01 Hz to 100.00 kHz
Constant
voltage
characteristics
Frequency response DC to 80 kHz ( -3 dB) (TYP) DC to 80 kHz ( -3 dB) (TYP) DC to 80 kHz ( -3 dB) (TYP) DC to 80 kHz ( -3 dB) (TYP) DC to 80 kHz ( -3 dB) (TYP)
Response 3.5 μs, 10 μs, 35 μs, 100 μs 3.5 μs, 10 μs, 35 μs, 100 μs 3.5 μs, 10 μs, 35 μs, 100 μs 3.5 μs, 10 μs, 35 μs, 100 μs 3.5 μs, 10 μs, 35 μs, 100 μs
Overshoot 5 % or less (TYP) 5 % or less (TYP) 5 % or less (TYP) 5 % or less (TYP) 5 % or less (TYP)
Ripple
noise		 (P-P): 50 mV (TYP), (rms): 12 mV (P-P): 50 mV (TYP), (rms): 12 mV (P-P): 50 mV (TYP), (rms): 12 mV (P-P): 50 mV (TYP), (rms): 12 mV (P-P): 50 mV (TYP), (rms): 12 mV
Load effect ± (0.005 % of setting + 1 mV) ± (0.005 % of setting + 1 mV) ± (0.005 % of setting + 1 mV) ± (0.005 % of setting + 1 mV) ± (0.005 % of setting + 1 mV)
Source effect ± (0.005 % of setting + 1 mV) ± (0.005 % of setting + 1 mV) ± (0.005 % of setting + 1 mV) ± (0.005 % of setting + 1 mV) ± (0.005 % of setting + 1 mV)

Note* Specifications are liable to change. For the full list of Specifications, please see the products datasheet located under the ‘Documentation’ tab.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

Optional Accessories …