Image of Pbz1600w

Kikusui PBZ20-140BP Bi-Polar Power Supply +/- 0-20V +/- 0-140A

£49384.00 (£59260.80 inc. VAT)

Available on back-order

Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)

SKU: PBZ20-140BP Categories: , Tags: , Brand:

Description


Kikusui PBZ20-140BP Bi-Polar Power Supply

The PBZ BP series is a series of high-power bipolar DC stabilised power supplies. The PBZ BP series are designed based on the PBZ Intelligent Bipolar power supply series, that supports large currents (up to ±200 A) and is assembled with exclusive rack system (Smart Rack). The 4-quadrant operation allows the power to be supplied (source) or absorbed (sink), and it is suitable for driving inductive loads or capacitive loads. Also, the PBZ/BP series are equipped with LAN, USB, GPIB, and RS232C as standard communication interfaces.

Features:

  • Equipped with LAN Interface (LXI Compliance)
  • +/- 0-20V +/- 0-140A

Product Images

Rack system (PBZ SRBP series)

Peak current output 6 times the rating (PBZ20-20A)

Parallel operation function

Low ripple and noise (in CV mode)

Unipolar mode

Synchronised operation function

Sequence function

×

Product Videos

YouTube Video
PBZ Bipolar Power Supply Overview

    Standard Hardware Accessories

Documentation


Complicated waveform generation
Strict standard testing support
World-leading rapid response performance
Parallel Operation with Different Power Supply Models
PBZ Series: How to Change Pulse Width Using Sequence Function
How to Enable Positive/Negative Output from DC Power Supply
PBZ Series: How to Output Synchronised Square Wave from TRIG OUT Terminal
How to Measure Output Impedance of Power Supply with Bipolar Power Supply PBZ Series
Blown Fuse Testing Precautions When Using Electronic Load
Output Connection Methods with Parallel Control
Output On/Off Behaviour of PBZ Series
Using Bipolar Power Supply PBZ Series as AC Electronic Load
What It Takes to Keep Regulated DC Power Supply Stable Part 1: Connecting Cable
How to Select a Right DC Power Supply Part 2: Key Considerations
What It Takes to Keep Regulated DC Power Supply Stable Part 2: Load Conditions
What Makes a Good Power Supply?
DC Power Supply Sinks Current when Output is Turned Off
How to Balance Battery Module Charge-Discharge
Which Power Supply is Most Suitable to Run DC Motor?
How to Double Output Voltage from Two PBZ through BTL* Connection

AC Input, Rated Output
ModelPBZ20-120 BPPBZ20-140 BPPBZ20-160 BPPBZ20-180 BPPBZ20-200 BP
Input Rating
Nominal input voltage200 Vac to 240 Vac, single phase200 Vac to 240 Vac, single phase200 Vac to 240 Vac, single phase200 Vac to 240 Vac, single phase200 Vac, single phase
Voltage range180 Vac to 250 Vac180 Vac to 250 Vac180 Vac to 250 Vac180 Vac to 250 Vac180 Vac to 220 Vac
Frequency range47 Hz to 63 Hz47 Hz to 63 Hz47 Hz to 63 Hz47 Hz to 63 Hz47 Hz to 63 Hz
Current30 Aac or less35 Aac or less40 Aac or less45 Aac or less50 Aac or less
Inrush current240 Apeak or less280 Apeak or less320 Apeak or less360 Apeak or less400 Apeak or less
Power5400 VA or less6300 VA or less7200 VA or less8100 VA or less9000 VA or less
Power factor0.95 TYP (when the input voltage is 200 V)0.95 TYP (when the input voltage is 200 V)0.95 TYP (when the input voltage is 200 V)0.95 TYP (when the input voltage is 200 V)0.95 TYP (when the input voltage is 200 V)
Output rating
Power2400W2800W3200W3600W4000W
Voltage± 20 V± 20 V± 20 V± 20 V± 20 V
Current±120A±140A±160A±180A±200A
Output terminal
Output terminalRear-panel output terminals (OUTPUT1, OUTPUT2)Rear-panel output terminals (OUTPUT1, OUTPUT2)Rear-panel output terminals (OUTPUT1, OUTPUT2)Rear-panel output terminals (OUTPUT1, OUTPUT2)Rear-panel output terminals (OUTPUT1, OUTPUT2)
Isolation voltage300 Vdc Only the output’s COM terminal can be grounded.300 Vdc Only the output’s COM terminal can be grounded.300 Vdc Only the output’s COM terminal can be grounded.300 Vdc Only the output’s COM terminal can be grounded.300 Vdc Only the output’s COM terminal can be grounded.
Constant Voltage (CV)
DC Voltage
Bipolar mode0 V to ± (105 % of rating)0 V to ± (105 % of rating)0 V to ± (105 % of rating)0 V to ± (105 % of rating)0 V to ± (105 % of rating)
Unipolar mode0 V to ± (105 % of rating)0 V to ± (105 % of rating)0 V to ± (105 % of rating)0 V to ± (105 % of rating)0 V to ± (105 % of rating)
Fine feature±5 % of rating±5 % of rating±5 % of rating±5 % of rating±5 % of rating
Resolution0.001 V (0.0001 V for the fine feature)0.001 V (0.0001 V for the fine feature)0.001 V (0.0001 V for the fine feature)0.001 V (0.0001 V for the fine feature)0.001 V (0.0001 V for the fine feature)
Accuracy± (0.05 % of setting + 0.05 % of rating)± (0.05 % of setting + 0.05 % of rating)± (0.05 % of setting + 0.05 % of rating)± (0.05 % of setting + 0.05 % of rating)± (0.05 % of setting + 0.05 % of rating)
Temperature coefficient± 100 ppm / °C of rating (TYP)± 100 ppm / °C of rating (TYP)± 100 ppm / °C of rating (TYP)± 100 ppm / °C of rating (TYP)± 100 ppm / °C of rating (TYP)
AC Voltage
Settable range0.00 Vp-p to (210 % of rating) p-p0.00 Vp-p to (210 % of rating) p-p0.00 Vp-p to (210 % of rating) p-p0.00 Vp-p to (210 % of rating) p-p0.00 Vp-p to (210 % of rating) p-p
Resolution0.1 V0.1 V0.1 V0.1 V0.1 V
Accuracy± 0.5% of rating± 0.5% of rating± 0.5% of rating± 0.5% of rating± 0.5% of rating
Settable range0.01 Hz to 100.00 kHz0.01 Hz to 100.00 kHz0.01 Hz to 100.00 kHz0.01 Hz to 100.00 kHz0.01 Hz to 100.00 kHz
Constant
voltage
characteristics
Frequency responseDC to 80 kHz ( -3 dB) (TYP)DC to 80 kHz ( -3 dB) (TYP)DC to 80 kHz ( -3 dB) (TYP)DC to 80 kHz ( -3 dB) (TYP)DC to 80 kHz ( -3 dB) (TYP)
Response3.5 μs, 10 μs, 35 μs, 100 μs3.5 μs, 10 μs, 35 μs, 100 μs3.5 μs, 10 μs, 35 μs, 100 μs3.5 μs, 10 μs, 35 μs, 100 μs3.5 μs, 10 μs, 35 μs, 100 μs
Overshoot5 % or less (TYP)5 % or less (TYP)5 % or less (TYP)5 % or less (TYP)5 % or less (TYP)
Ripple
noise		(P-P): 50 mV (TYP), (rms): 6 mV(P-P): 50 mV (TYP), (rms): 6 mV(P-P): 50 mV (TYP), (rms): 6 mV(P-P): 50 mV (TYP), (rms): 6 mV(P-P): 50 mV (TYP), (rms): 6 mV
Load effect± (0.005 % of setting + 1 mV)± (0.005 % of setting + 1 mV)± (0.005 % of setting + 1 mV)± (0.005 % of setting + 1 mV)± (0.005 % of setting + 1 mV)
Source effect± (0.005 % of setting + 1 mV)± (0.005 % of setting + 1 mV)± (0.005 % of setting + 1 mV)± (0.005 % of setting + 1 mV)± (0.005 % of setting + 1 mV)

Note* Specifications are liable to change. For the full list of Specifications, please see the products datasheet located under the ‘Documentation’ tab.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

Optional Accessories …