Comb Generators
An EMC Comb Generator is a signal source that produces a series of narrow spectral spikes (resembling the teeth of a comb) at precise, regular frequency intervals. It is primarily used as a reference source to validate and calibrate EMC (Electromagnetic Compatibility) test setups.
Why Use a Comb Generator?
System Verification: Before starting an expensive compliance test, a comb generator allows you to check that your spectrum analyser, cables, and antennas are all working correctly. If the "teeth" don't appear at the expected levels, you know there is a fault in your measurement chain.
Normalization of Test Environments: It helps compare different test sites (e.g., an Open Area Test Site vs. an Anechoic Chamber) by providing a stable, known emission source that can be moved between them.
Cable and Filter Characterisation: By injecting a comb signal through a cable or filter, you can instantly see the frequency response across a wide range without needing to manually sweep a signal generator.
Quick "Go/No-Go" Checks: It provides a fast way to verify that your pre-compliance setup is still "in-tune" and hasn't drifted since its last formal calibration.
Core Applications
Radiated Emissions Testing: Battery-powered, portable comb generators (like the Tekbox TBCG1) are placed inside a test chamber to act as a "standard emitter" to check antenna and receiver performance from 100MHz up to 6GHz.
Conducted Emissions Reference: Some models (like the TBCG3-CN) are designed to be plugged directly into a LISN (Line Impedance Stabilisation Network) to verify that conducted noise measurements are accurate.
Shielding Effectiveness: By placing a comb generator inside a shielded enclosure or "taped" box, you can measure how much signal "leaks" out, helping to identify gaps or weak points in EMI shielding.
Frequency Multiplier: Passive comb generators (like the TBCG2) can take a lower-frequency input and "multiply" it into the GHz range, creating a broad reference signal for general laboratory use.
Showing all 8 results
-

TBCG3-CN COMB GENERATOR
£1,110.00 (£1,332.00 inc. VAT)Available on back-order
Add to basket -

TBCG3-RN2 COMB GENERATOR
£1,391.00 (£1,669.20 inc. VAT)1 in stock (can be backordered)
Add to basket -

TBCG3-RN6 COMB GENERATOR
£1,577.00 (£1,892.40 inc. VAT)Available on back-order
Add to basket -

TBCG4 General Purpose Comb Generator
£390.00 (£468.00 inc. VAT)1 in stock (can be backordered)
Add to basket -

TEKBOX TBCG1-100MHz Radiating Comb Generator
£95.00 (£114.00 inc. VAT)3 in stock (can be backordered)
Add to basket -

TEKBOX TBCG1-25MHz Radiating Comb Generator
£95.00 (£114.00 inc. VAT)Available on back-order
Add to basket -

TEKBOX TBCG2 COMB GENERATOR/FREQUENCY MULTIPLIER
£95.00 (£114.00 inc. VAT)2 in stock (can be backordered)
Add to basket -

Tekbox TBCG5 General Purpose Comb Generator
£517.00 (£620.40 inc. VAT)Available on back-order
Add to basket












FREE SHIPPING £75+
CELEBRATING 50+ YEARS
PRICE MATCH GUARANTEE 





