CONTACT ACCOUNT

TEL: 0118 978 6911

Home / 2020 (Page 15)

Archive for 2020

Timer operation with the DP700 series power supply

Posted on: December 16th, 2020 by Doug Lovell

16/12/2020
The DP700 series power supply provides a timer function. When the timing output is enabled, the instrument will configure the output voltages and currents based on the preset timer parameters. The edited timer parameters are allowed to be saved to the internal non-volatile memory (NVM), and can be recalled if necessary. ...

Timer operation with the DP800 series power supply

Posted on: December 16th, 2020 by Doug Lovell

16/12/2020
When the timer is enabled the power supply will output preset voltage and current values at time increments you specify. Press Timer and then Timer Set to see the screen below. The columns 0-5 represents steps or groups that will be output at the Set time in seconds. So for this example only column 0 will be output since the Group field has been set to 1. ...

Lock and Unlock Capability of the DP800 series

Posted on: December 16th, 2020 by Doug Lovell

16/12/2020
The DO800 series allows you to easily lock and unlock the instrument’s front panel by pressing and holding on the OK button in the bottom right hand corner of the front panel. When the instrument is locked the only buttons that are fully function are the individual channel On/Off buttons otherwise the rest will not respond. To unlock the instrument, you need to press and hold the OK button j...

How to install DP800 Option Licenses

Posted on: December 16th, 2020 by Doug Lovell

16/12/2020
DP800 series power supply provides the following options: High Res: 1mV/1mA Resolution option for the DP800 Family Interface: RS2322 and LAN interface option for DP800 Family AFK: Detect and Analyze option for the DP800 Family ...

DP800 Channel Track

Posted on: December 16th, 2020 by Doug Lovell

16/12/2020
The track capability allows the DP800 to have channel 1 and channel 2 create the same amount of power while only changing one channel, this allows customers to quickly adjust their desired power. To enable this feature you need to press the Track button on the bottom right hand side of the display when presented with the main working window. With Track enable both channel 1 and channel 2 will ...

DP700 series Power Supply Maximum Trigger Input Voltage

Posted on: December 16th, 2020 by Doug Lovell

16/12/2020
Pin 8 of the RS232 interface on the rear panel is used to receive the external trigger input signal. When it receives a high level signal (≥ 2.1 V, 10 mA), the channel output will be turned on. If 8 volts or greater is applied damage to the power supply I/O circuit can result....

DP800 Timer File Format

Posted on: December 16th, 2020 by Doug Lovell

16/12/2020
The DP800 can load Timer files that are created externally, these timer files need to be saved as CSV files and can be created using Excel. Below shows an example of a timer file. Note that the file cannot exceed 2048 steps. ...

How to use the Timer Function on the DP800

Posted on: December 16th, 2020 by Doug Lovell

16/12/2020
The timer function can be used on the DP800A or the DP800 series if a Timer option has been installed. To create a Timer file on the instrument, press the “Timer” button and then press “Timer Set”. Once you are in the Timer Set to enter a value you need to pre...

Serial Cable for the DP700 series Power Supply

Posted on: December 16th, 2020 by Doug Lovell

16/12/2020
The DP700 series power supplies have a single serial I/O port. If you plan on programming the DP700 power supply from a PC you will need a USB to serial cable. An example is pictured here: ...

What are the mating connectors for the MC switch modules used with the M300?

Posted on: December 15th, 2020 by Doug Lovell

15/12/2020
...

MC3065 DMM Module is not recognized by the M300 mainframe

Posted on: December 15th, 2020 by Doug Lovell

15/12/2020
The Rigol MC3065 DMM module is designed for use with the RIgol M300 switch/DMM data acquisitionsystem.If the MC305 module is not recognized, there are a few steps that can help to isolate the cause of theproblem....

How do I convert Anysensor (*.xsda) DMM Data to CSV?

Posted on: December 15th, 2020 by Doug Lovell

15/12/2020
The attached software and instructions can be used to convert Anysensor (*xsda) data to CSV. Software has been tested on Win XP, Win 7 32 and 64 bit Operating Systems. Download it from here....

Sub Categories

AC Power Supplies / Frequency Converters Offers & Promotions (1)

Application Notes

Blog (96)

DC Power Supplies Offers & Promotions (6)

Digital Multimeters Offers & Promotions (1)

Digital Oscilloscopes Offers & Promotions (5)

Electronic Loads Offers & Promotions (1)

Events (7)

Knowledge Base AC Power Supplies

Knowledge Base Data Acquisition Systems

Knowledge Base DC Power Supplies

Knowledge Base DG1000 Series (14)

Knowledge Base DG4000 Series (14)

Knowledge Base Digital Multimeters

Knowledge Base Digital Oscilloscopes

Knowledge Base DL3000 Series (2)

Knowledge Base DM3000 Series (21)

Knowledge Base DP700 Series (8)

Knowledge Base DP800 Series (26)

Knowledge Base DS1000 Series (46)

Knowledge Base DS2000 Series (36)

Knowledge Base DSA800 Series (70)

Knowledge Base DSG800 Series (2)

Knowledge Base Electrical Safety Analysers

Knowledge Base Electronic Loads

Knowledge Base M300 Series (2)

Knowledge Base MSO/DS7000 Series (35)

Knowledge Base MSO5000 Series (35)

Knowledge Base MSO8000 Series (32)

Knowledge Base PBZ Series (3)

Knowledge Base PCR-LE Series (3)

Knowledge Base PCR-MA Series (3)

Knowledge Base PCR-WE/WE2 Series (3)

Knowledge Base PLZ-5W Series (3)

Knowledge Base PLZ-5WH Series (3)

Knowledge Base PLZ-5WH2 Series (3)

Knowledge Base PMX-Multi Series (3)

Knowledge Base PWR-01 Series (3)

Knowledge Base RF Signal Generators

Knowledge Base RSA3000 Series (32)

Knowledge Base RSA5000 Series (31)

Knowledge Base SDG1000X Series (10)

Knowledge Base SDG2000X Series (11)

Knowledge Base SDG6000X Series (11)

Knowledge Base SDG800 Series (10)

Knowledge Base SDL1000X Series (5)

Knowledge Base SDM3000 Series (6)

Knowledge Base SDS1000X-E Series (15)

Knowledge Base SDS2000X-E Series (15)

Knowledge Base SDS5000X Series (15)

Knowledge Base SPD1000X (5)

Knowledge Base SPD3000X/X-E Series (6)

Knowledge Base Spectrum Analysers

Knowledge Base SSA3000X Plus Series (2)

Knowledge Base SSA3000X Series (15)

Knowledge Base SSA3000X-R Series (1)

Knowledge Base SSG3000X Series (4)

Knowledge Base SVA1000X Series (13)

Knowledge Base TOS9300 Series (3)

Knowledge Base Waveform Generators

LCR Meters Offers & Promotions (1)

Product Support (1)

RF Signal Generators (1)

Safety Testers Offers & Promotions (1)

Spectrum Analysers Offers & Promotions (4)

Telonic Instruments News (19)

Telonic Offers & Promotions (7)

Product Categories

AC Power Supplies / Frequency Converters
DC Power Supplies
DC Electronic Loads
Test & Measurement
Safety Testers
EMC
Soldering Irons / Test Tools
Manufacturers
Rental

Service & Support

About
Contact
Newsletter
Service Returns Form
Returns Policy
Terms and Conditions
Privacy Policy
Shipping & Delivery
My account

Support, News & Events

Latest News
Future Events
Product Support
Blog

Copyright © 2024. All rights reserved by Telonic Instruments Ltd

Website operated by Jumping Giraffe Ltd. Jumping Giraffe Ltd is not responsible for content on external websites.

CLICK TO CALL

0118 9786911

CLICK TO EMAIL