Input Voltage: 0-150V
Input Current: 0-40A/60A
Power: 200W/350W
Modes: CC, CV, CR, CP
Max Duty / Slew: 30kHz – 0.5A/MicroS
RS232, LAN, USB, GPIB (Opt.)

Input Voltage: 1-150V
Input Current: 0-30A
Power: 200W/300W
Modes: CC, CV, CR, CP
Max Duty / Slew: 25kHz – 2.5A/MicroS
RS232, LAN, USB, GPIB (Opt.)

Input Voltage: 0-150V
Input Current: 0-100A
Power: 70, 150W
Modes: CC, CR, CV, CP, CC+CV, CR+CV
Max Duty / Slew: 20kHz – 2.4A/MicroS
RS232, USB, GPIB

Input Voltage: 0.25-150V
Input Current: 0-21600A
Power: 200, 400, 1200 to 10800W
Modes: CC, CR, CV, CP, CC+CV, CR+CV, Short, Arb
Max Duty / Slew: 100kHz 60A/MicroS
RS232, USB, LAN, GPIB

Input Voltage: 0.25-150V
Input Current: 0-21600A
Power: 200, 400, 1200
Modes: CC, CR, CV, CP, CC+CV, CR+CV, Short, Arb
Max Duty / Slew: 100kHz 60A/MicroS
RS232, USB, LAN, GPIB

Input Voltage: 10-1000V
Input Current: 0-400A
Power: 1kW – 20kW
Modes: CC, CR, CV, CP, Arb
Max Duty / Slew: 10kHz – 20A/MicroS
RS232C, LAN, USB, GPIB (Opt.)

Voltage: 0-70V to 0-1500V
Current: 0-±30A to 0-±9000A
Power: 15kW to 300kW
LAN, Digital I/O*, Iso Analogue*, Master Slave*, RS232*, RS485*, RS422*, USB*

Voltage: 0-70V to 0-1500V
Current: 0-±30A to 0-±450A
Power: 15kW
LAN, Digital I/O*, Iso Analogue*, Master Slave*, RS232*, RS485*, RS422*, USB*

Click here to see Electronic Loads available to rent.

Kikusui Battery Impedance Meters 300V/1000V Max.

Bench and Handheld Spectrum Analysers from 9kHz to 26.5GHz

Bench Vector Network Analysers from 9kHz to 26.5GHz

Brymen Clamp-On Multimeters

Precision Current Transducers up to 2000A
Data Loggers / DAQ
Handheld and Bench Data Loggers

Graphtec Data Loggers and Rigol Data Acquisition Systems

Bench and Handheld DMM up to 6.5 digits

Bench and Handheld Oscilloscopes from 50MHz to 2GHz

Frequency: 10MHz to 1000MHz
Channels: 1/2
Sample Rate: 125MSa/s to 2.4GSa/s

Maximum Frequency: 1.5GHz to 20GHz

Brymen Handheld Multimeters

Microtest/Sourcetronic LCR Meters

Single and Three Phase Power Analysers

Click here to see Test & Measurement units available to rent.

Aaronia and Tekbox Antennas

Bench and Handheld Spectrum Analysers from 500MHz to 7.5GHz

9kHz to 6GHz
5 Models

The probes serve to locate and identify potential sources of interference within the building blocks of electronic assemblies

RF Cables including RG58, RG316U, RG223 and RG142. BNC, N-Type, SMA, SMB

Tekbox RF Current Monitoring Probes

Bulk Current Injection Probes (BCI Probes)

Maximum Frequency: 1.5GHz to 13.6GHz

Click here to see EMC Pre-Compliance units available to rent.

wideband injection transformer for control loop stability measurements

25V – 1000V Insulation Resistance Tester

Click here to see Safety Testers available to rent.