Rigol RSA5032 3.2GHz Real-Time Spectrum Analyser

£5213.00 (£6,255.60 inc VAT)

Available on back-order

Request QuoteRemove from Quote
Request Quote
SKU: RSA5032 Categories: ,

Description


Rigol RSA5032 Real-Time Spectrum Analyser

The RSA5032 is a 9kHz to 3.2GHz Real-Time Spectrum Analyser. The Rigol RSA5000 series real-time spectrum analysers combines the power of a high-performance conventional spectrum analyser with superior real-time performance, unmatched in this product category. Available in 3.2GHz and 6.5GHz models, all RSA5000 series analysers provide a resolution bandwidth (RBW) down to 1Hz, a noise floor as low as -165dBm/Hz and a full span sweep as fast as 1ms. In addition, the analyser features up to 40MHz of real-time bandwidth (optional), a minimum probability of intercept (POI) of 7.45µs, 7-rich visualisation modes and powerful triggering capability. The Rigol RSA5000 series is a complete analysis package for engineers developing and integrating todays wireless technologies utilising complex and dynamic modulation schemes.

Features:

  • Displayed average noise level (DANL): <-165dBm (typical) (With Optional Pre-Amp On)
  • Phase noise: <-108dBc/Hz @ 10kHz (typical, f = 1GHz)
  • Level measurement uncertainty: <0.8dB
  • Built-in tracking generator (‘-TG’ models only)
  • Minimum RBW: 1Hz
  • EMC filter and quasi-peak detector
  • Various measurement functions
  • Multiple measurement modes
  • Up to 40MHz real-time analysis bandwidth
  • Multiple trigger modes and trigger masks
  • Density, spectrogram, and other display modes
  • 10.1” capacitive multi-touch screen, supporting touch gestures
  • USB, LAN, HDMI and other communication and display interfaces
  • Supplied with… Power cable & quick guide
  • Options include… Preamplifier, high-stability reference, 40MHz real-time / analysis bandwidth, advanced measurement kit
  • Optional PC software… Ultra Spectrum, S1210 EMI Pre-Compliance Test
  • Accessories include… Rack mount kit

Rigol RSA5000 Real-Time Spectrum Analyser Comparison Table

ModelFrequency RangeReal-Time BandwidthMinimum Resolution Bandwidth (RBW)Maximum CW RF PowerSSB Phase Noise (@10kHz Offset)DANL, PreAmplifier Off (TYP. 20MHz – 1.5GHz)DANL, PreAmplifier On (TYP. 20MHz – 1.5GHz)
RSA50329kHz – 3.2GHz25MHz (standard)
40MHz (optional)		1Hz30dBm (1W)<-108dBc/Hz typ.<-145dBm/Hz<-165dBm/Hz
RSA5032-TG9kHz – 3.2GHz25MHz (standard)
40MHz (optional)		1Hz30dBm (1W)<-108dBc/Hz typ.<-145dBm/Hz<-165dBm/Hz
RSA50659kHz – 6.5GHz25MHz (standard)
40MHz (optional)		1Hz30dBm (1W)<-108dBc/Hz typ.<-145dBm/Hz<-165dBm/Hz
RSA5065-TG9kHz – 6.5GHz25MHz (standard)
40MHz (optional)		1Hz30dBm (1W)<-108dBc/Hz typ.<-145dBm/Hz<-165dBm/Hz

Product Images

Product Videos

YouTube Video
Rigol RSA5000 Series Introduction
YouTube Video
Introduction into Real-Time Spectrum Analysis
YouTube Video
Benefits of Real-Time Spectrum Analysis

Documentation

Datasheet

Rigol RSA5000 Datasheet

User Guide

Rigol RSA5000 User Guide

EMI Mode Getting Started

Rigol RSA EMI Mode Getting Started

Application Notes

Using probes with a Spectrum Analyser

Measuring Cable Loss with a Spectrum Analyser

EMC Precompliance: Near Field Probes

EMC Precompliance: Conducted Emission Testing

TX1000 Transmitter Education Testing Application Note

EMC Precompliance Testing

How to measure an amplifier using a DSA-815-TG?

How to measure a filter using a DSA-815-TG Spectrum Analyzer

FM signal transmission and demodulation demo

IoT Antenna Debugging

Keyless Entry System ASK/FSK Analysis

Real-Time vs. Swept Spectrum Analysers

VNA Measurements Application Note

RIGOL´s new Solution for EMI pre-compliance tests


Measurement Mode
Frequency RangeRSA5032/-TG/N: 9kHz to 3.2GHz
RSA5065/-TG/N: 9kHz to 6.5GHz
Reference Frequency10 MHz
Accuracy±[(time since last calibration × aging rate) + temperature stability + calibration
accuracy]
Initial Calibration
Accuracy		Standard <1 ppm
Option OCXO-C08 <0.1 ppm
Temperature
Stability		0℃ to 50℃ , with the reference 25℃
Standard <0.5 ppm
Option OCXO-C08 <0.005 ppm
Aging RateStandard <1 ppm/year
Option OCXO-C08 <0.03 ppm/year
Frequency
Marker Frequency Resolutionspan/(number of sweep points – 1)
Marker Frequency Uncertainty±(marker frequency readout × reference frequency accuracy + 1% × span + 10% ×
resolution bandwidth + marker frequency resolution)
Resolution1 Hz
Uncertainty±(marker frequency readout × reference frequency accuracy + counter resolution)
RangeStandard 0 Hz, 100 Hz to maximum frequency
Option RSA3000-BW1 0 Hz, 10 Hz to maximum frequency
Resolution2 Hz
Uncertainty±span/(number of sweep points – 1)
Carrier Offset<-95 dBc/Hz (typical)
10 kHz <-106 dBc/Hz, <-108 dBc/Hz (typical)
100 kHz <-106 dBc/Hz, <-108 dBc/Hz (typical)
1 MHz <-115 dBc/Hz, <-117 dBc/Hz (typical)
Amplitude
Rangefc ≥ 10 MHz
DANL to +30 dBm
DC Voltage50 V
CW RF Power+30 dBm, attenuation ≥ 40 dB, preamp off.
-10 dBm, attenuation = 20 dB, preamp on.
CW RF Power+33 dBm (2 W)
Logarithmic Scale1 dB to 200 dB
Linear Scale0 to reference level
Number of Display Points801
Number of Traces6
Trace Detectornormal, pos-peak, neg-peak, sample, RMS average, voltage average, and
quasi-peak (Option RSA3000-EMC)
Trace Functionclear write, max hold, min hold, average, view, blank
Scale UnitdBm, dBmV, dBμV, nV, μV, mV, V, nW, μW, mW, W
General Specifications
Display
Typecapacitive multi-touch screen
Resolution1024 × 600 pixels
Size10.1”
Colour24-bit colour
Power
Input Voltage Range, AC100 V to 240 V (nominal)
AC Frequency45 Hz to 440 Hz
Power Consumption55 W (typical), max. 90 W with all options
Environment
TemperatureOperating Temperature
Range 0℃ to 50℃
Storage Temperature
Range -20℃ to 70℃
Humidity0℃ to 30℃ ≤ 95% RH
30℃ to 40℃ ≤ 75% RH
AltitudeOperating Height: below 3,048 m (10,000 feet)

Note*

Specifications are liable to change. For the full list of Specifications, please see the products datasheet located under the ‘Documentation’ tab.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

Mandatory Accessories …

Optional Accessories …