Siglent SDS5102X 2Ch, 1GHz, 5/2.5GSa/s, Super Phosphor Oscilloscope

£4685.00 (£5,622.00 inc VAT)

Available on back-order

SKU: SDS5102X Category:

Description


Siglent SDS5102X has been discontinued please see SDS5104X HERE

The SDS5102X is a 2CH, 1GHz Super Phosphor Oscilloscope and has a maximum sample rate of 5GSa/s and a maximum record length of 250Mpts. Siglent’s SDS5000X Series Digital Storage Oscilloscopes are available in bandwidths of 1GHz, 500 MHz and 350MHz, have a maximum sample rate of 5 GSa/s, maximum record length of 250Mpts, and display up to 4 analogue channels + 16 digital channels mixed signal analysis ability.

The SDS5000X series employs Siglent’s SPO technology with a maximum waveform capture rate of up to 110,000 wfms/s (normal mode, up to 480,000 wfms/s in sequence mode), 256-level intensity grading display function plus a colour temperature display mode. It also employs an innovative digital trigger system with high sensitivity and low jitter. The trigger system supports multiple powerful triggering modes including serial bus triggering. History waveform recording, Sequence acquisition, Search and Navigate functions allow for extended waveform records to be captured, stored and analysed. An impressive array of measurement and math capabilities, options for a 25MHz arbitrary waveform generator, as well as serial decoding are also features of the SDS5000X.

The large 10.1″ display capacitive touch screen supports multi-touch gestures, with the addition of user-friendly one-button design for most commonly used functions, can greatly improve the operation efficiency of the SDS5000X. It also supports mouse and external keyboard control.

  • 1GHz, 500MHz, 350MHz models with a real-time sample rate up to 5 GSa/s
  • SPO Technology
  • Waveform capture rates up to 110,000 wfms/s (normal mode), and 480,000 wfms/s (sequence mode)
  • Supports 256-level intensity grading and colour temperature display modes
  • Record length up to 250Mpts
  • Digital trigger system
  • Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, Qualified and Video (HDTV supported).
  • Trigger zone helps to simplify advanced triggering
  • STANDARD SERIAL BUS TRIGGERING AND DECODER, SUPPORTS PROTOCOLS: I2C, SPI, UART, CAN and LIN.
  • Optional Serial Bus Triggering and Decoder include: CAN FD, FlexRay, I2S and MIL-STD-1553B.
  • Low background noise, supports 0.5mV/div to 10 V/div voltage scales
  • Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 100,000), according to trigger conditions set by the user, with a very small dead time between segments to capture the qualifying event
  • History waveform record (History) function, the maximum recorded waveform length is 100,000 frames
  • Automatic measurement function on 39 parameters, supports statistics with histogram, Gating measurement, Math measurement, History measurement, and Ref measurement
  • 25MHz function / arbitrary waveform generator, built-in multiple predefined waveforms
  • Large 10.1″ TFT-LCD display with 1024 / 600 resolution, Capacitive touch screen supports multi-touch gestures
  • Multiple interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11, telnet, socket, web), Pass/Fail, Trigger Out. 10MHz in, 10MHz out, VGA output
  • Built-in web server supports remote control by the LAN port using a web browser
  • Supports SCPI remote control commands

Product Videos

Documentation

Acquire System (Analogue Channel)
Sample Rate 5 GSa/s (interleaving mode),
2.5 GSa/s (non-interleaving mode)
Memory Depth 250 Mpts (interleaving mode),
125 Mpts (non-interleaving mode)
Peak Detect 400 ps
Average 4, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536
Eres Enhanced bit: 0.5, 1, 1.5, 2, 2.5, 3
Sequence Up to 100,000 segments, interval between triggers = 2 μs min
History Up to 100,000 frames
Interpolation sinx/x, x
Vertical System (Analogue Channel)
Bandwidth (-3dB) @50 Ω 350MHz, 500MHz, 1GHz
Rise time (typical) @50 Ω 1.0ns, 0.7ns, 0.4ns
Vertical range 8 divisions
DC gain accuracy < 1.5%, ≥5mV/div
< 3.0%, <5mV/div
Offset accuracy ±(1.5%*offset+1.5%*full scale+1mV)
Bandwidth limit 20 MHz (±40%)
200 MHz (±40%)
Coupling DC, AC, GND
Impedance DC1M: (1 MΩ±2%) || (16 pF±2 pF)
AC1M: (1.2 MΩ±2%) || (16 pF±2 pF)
50 Ω: 50 Ω±1%
Max. Input voltage 1MΩ ≤ 400Vpk(DC + AC), DC~10kHz
50Ω ≤ 5Vrms, ±10V Peak
CH to CH Isolation (@50Ω) DC ~ 100 MHz >40 dB
100 MHz ~ BW: ≥34 dB
Horizontal System
Time Scale SDS5032X/SDS5034X: 1 ns/div – 1000 s/div
SDS5052X/SDS5054X: 500 ps/div – 1000 s/div
SDS5102X/SDS5104X: 200 ps/div – 1000 s/div
Waveform Update Rate Up to 110,000 wfm/s
Intensity Grading 256-level
Display Mode Y-T, X-Y, Roll
Roll Mode ≥ 50 ms/div
Skew (CH1~CH4) < 150 ps
Time Base Accuracy ±1ppm initial; ±1ppm 1st year aging; ±3.5ppm 10-year aging
Trigger System
Mode Auto, Normal, Single
Level Internal: ±4.1 div from the centre of the screen
EXT: ±0.61 V
EXT/5: ±3.05 V
Hold Off Range By time: 8 ns ~ 30 s (8 ns step)
By event: 1 ~ 10
Coupling CH1~CH4
DC: Passes all components of the signal
AC: Blocks DC components and attenuates signals below 8 Hz
LFRJ: Attenuates the frequency components below 1.2 MHz
HFRJ: Attenuates the frequency components above 740 kHz
Noise RJ: Increases the trigger hysteresis
EXT
DC: Passes all components of the signal
AC: Blocks DC components and attenuates signals below 10 Hz
LFRJ: Attenuates the frequency components below 400 kHz
HFRJ: Attenuates the frequency components above 1.6 MHz
Accuracy CH1~CH4: ±0.2div
EXT: ±0.3div
Jitter <9ps RMS (typical) for ≥300MHz sine and ≥6 divisions peak to peak amplitude for vertical gain
settings from 2.5mV/div to 10V/div
<5ps RMS (typical) for ≥500MHz sine and ≥6 divisions peak to peak amplitude for vertical gain
settings from 2.5mV/div to 10V/div
Displacement Pre-Trigger: 0 ~ 100% memory
Delay-Trigger: 0 ~ 5,000 div
Zone Up to 2 zones
Source: CH1~CH4
Property: Intersect, Not Intersect
Edge Trigger
Source CH1~CH4/EXT/(EXT/5)/AC Line/D0~D15
Slope Rising, Falling, Rising & Falling
Slope Trigger
Source CH1~CH4
Slope Rising, Falling
Limit range <, >, in range, out of range
Time range 2ns ~ 20s,Resolution = 1 ns
Pulse Width Trigger
Source CH1~CH4/D0~D15
Polarity +wid, -wid
Limit range <, >, in range, out of range
Time range 2ns ~ 20s,Resolution = 1 ns
Video Trigger
Source CH1~CH4
Standard NTSC,PAL,720p/50,720p/60,1080p/50,1080p/60,1080i/50,1080i/60,Custom
Synchronization Any, Select
Trigger Condition Line, Field
Window Trigger 
Source CH1~CH4
Window type Absolute, Relative
Interval Trigger
Source CH1~CH4/D0~D15
Slope Rising, Falling
Limit range <, >, in range, out of range
Time range 2ns ~ 20s,Resolution = 1 ns
Dropout Trigger
Source CH1~CH4/D0~D15
Timeout type Edge, State
Slope Rising, Falling
Time range 2ns ~ 20s,Resolution = 1 ns
Runt Trigger
Source CH1~CH4
Polarity Positive, Negative
Limit range <, >, in range, out of range
Time range 2ns ~ 20s,Resolution = 1 ns
Pattern Trigger
Source CH1~CH4/D0~D15
Pattern Setting Don’t Care, Low, High
Logic AND, OR, NAND, NOR
Limit range <, >, in range, out of range
Time range 2ns ~ 20s,Resolution = 1 ns
Qualified Trigger
Type State, State with Delay, Edge, Edge with Delay
Qualified Source CH1~CH4/D0~D15
Edge Trigger Source CH1~CH4/D0~D15
Nth Edge Trigger
Source CH1~CH4/D0~D15
Slope Rising, Falling
Idle time 8ns ~ 20s,Resolution = 1 ns
Edge Number 1 ~ 65535
Delay Trigger
Source A CH1~CH4/D0~D15
Source B CH1~CH4/D0~D15
Slope Rising, Falling
Limit range <, >, in range, out of range
Time range 2ns ~ 20s,Resolution = 1 ns
Serial Trigger
Source CH1~CH4/D0~D15
Protocol Standard:I2C、SPI、UART、CAN、LIN
Optional:CAN FD、FlexRay、I2S、MIL-STD-1553B、SENT
I2C Type: Start, Stop, Restart, No Ack, EEPROM, Address & Data, Data Length
SPI Type: Data
UART Type: Start, Stop, Data, Parity Error
CAN Type: All, Remote, ID, ID+Data, Error
LIN Type: Break, Frame ID, ID+Data, Error
CAN FD(Optional) Type: Start, Remote, ID, ID+Data, Error
FlexRay(Optional) Type: TSS, Frame, Symbol, Errors
I2S(Optional) Type: Data, Mute, Clip, Glitch, Rising Edge, Falling Edge
MIL-STD-1553B (Optional) Type:Transfer, Word, Error, Timing
SENT(Optional) Type:Start, Slow channel, Fast channel, Error
General Specifications
Input Voltage & Frequency 100 ~ 240 Vrms 50/60Hz
Power consumption 100 W max., 70 W typical, 4 W typical in standby mode
Standard 3 USB Hosts, 1 USB Device, LAN, AUX (Pass/Fail+Trigger Out), 10 MHz In/ Out
Pass/Fail 3.3 V TTL output
Ext Trigger Channel Ext≤1.5 Vrms, Ext/5≤7.5 Vrms
Display Type 10.1”TFT LCD with capacitive touch screen
Resolution 1024×600
Contrast 500:1 typical
Backlight 500 nit typical
Temperature Operating: 0 °C ~ 40 °C
Non-operating: -20 °C ~ 60 °C
Humidity Operating: 85% RH, 40 °C , 24 hours
Non-operating: 85% RH, 65 °C, 24 hours
Altitude Operating: ≤3,000 m
Non-operating: ≤15,000 m
Dimensions Length x Width x Height = 370 mm×144 mm×231 mm
Weight Net Weight: 3.9 kg(2-ch); 4.0 kg(4-ch)
Gross Weight: 5.4 kg(2-ch); 5.6 kg(4-ch)

Note*

Specifications are liable to change. For the full list of Specifications, please see the products datasheet located under the ‘Documentation’ tab.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • 4015 Sensepeek PCBite Kit with 2 x SP100 100MHz Handsfree Oscilloscope Probe

    £142.22

    1 in stock (can be backordered)

    Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)

    Add to basket
  • 4007 Sensepeek PCBite Kit (Large Base Plate)

    £58.00

    4 in stock (can be backordered)

    Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)

    Add to basket
  • 4002 Sensepeek PCBite Kit (Small Base Plate)

    £49.00

    10+ In UK Stock

    Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)

    Add to basket

Mandatory Accessories …

Optional Accessories …