Rigol RSA3015E-TG 1.5GHz Real-Time Spectrum Analyser

(1 customer review)

£1564.00 (£1,876.80 inc VAT)

Available on back-order

Request QuoteRemove from Quote
Request Quote
SKU: RSA3015E-TG Categories: ,

Description


Rigol RSA3015E-TG Real-Time Spectrum Analyser

The RSA3015E-TG is a 9kHz to 1.5GHz Real-Time Spectrum Analyser. The RSA3000E/TG Series is Rigol’s new low cost version of the already popular RSA3000 Series. All RSA3000E/TG Real-time Spectrum analysers provide up to 10MHz real-time analysis bandwidth, Phase Noise of <-102dBc/Hz (typical) and Min. RBW 1Hz. In addition, the analysers feature Various Advanced Measurement Function, Multiple measurement modes and Level Measurement Uncertainty of <1.0dB.

Features:

  • Frequency: Up to 1.5GHz
  • Displayed Average Noise Level (DANL): <-161dBm (typical) (With Optional Pre-Amp On)
  • Phase Noise: <-102dBc/Hz (typical)
  • Level Measurement Uncertainty: <1.0dB
  • 1.5GHz Tracking Generator
  • Min. RBW 1Hz
  • Up to 10MHz real-time analysis bandwidth
  • Multiple measurement modes
  • Various advanced measurement functions
  • EMI measurement application (option)
  • Multiple trigger modes and trigger masks
  • Density, spectrogram, and other display modes
  • PC Software Options
  • 10.1″ Capacitive multi-touch screen; supporting touch gestures
  • USB, LAN, HDMI and other communication and display interfaces

Rigol RSA3000E Real-Time Spectrum Analyser Comparison Table

ModelFrequency RangeReal-Time BandwidthMinimum Resolution Bandwidth (RBW)Maximum CW RF PowerSSB Phase Noise (@10kHz Offset)Displayed Average Noise Level (DANL)
RSA3015E9kHz – 1.5GHz10MHz1Hz+33 dBm (2 W)<-102 dBc/Hz (typical)<-161 dBm (typical)
RSA3015E-TG9kHz – 1.5GHz10MHz1Hz+33 dBm (2 W)<-102 dBc/Hz (typical)<-161 dBm (typical)
RSA3030E9kHz – 3GHz10MHz1Hz+33 dBm (2 W)<-102 dBc/Hz (typical)<-161 dBm (typical)
RSA3030E-TG9kHz – 3GHz10MHz1Hz+33 dBm (2 W)<-102 dBc/Hz (typical)<-161 dBm (typical)

Product Images

Documentation

Datasheet

Rigol RSA3000E Datasheet

 

User Manual

Rigol RSA3000E User Manual

 

User Guide

Rigol RSA3000E User Guide

 

EMI Mode Getting Started

Rigol RSA EMI Mode Getting Started

 

Application Notes

Using probes with a Spectrum Analyser

Measuring Cable Loss with a Spectrum Analyser

EMC Precompliance: Near Field Probes

EMC Precompliance: Conducted Emission Testing

TX1000 Transmitter Education Testing Application Note

EMC Precompliance Testing

How to measure an amplifier using a DSA-815-TG?

How to measure a filter using a DSA-815-TG Spectrum Analyzer

FM signal transmission and demodulation demo

IoT Antenna Debugging

Keyless Entry System ASK/FSK Analysis

Real-Time vs. Swept Spectrum Analysers

VNA Measurements Application Note

RIGOL´s new Solution for EMI pre-compliance tests

 

Measurement Mode
Frequency RangeRSA3015E/RSA3015E-TG: 9 kHz to 1.5GHz
RSA3030E/RSA3030E-TG: 9 kHz to 3GHz
Reference Frequency10 MHz
Accuracy±[(time since last calibration × aging rate) + temperature stability + calibration
accuracy]
Initial Calibration
Accuracy		Standard <1 ppm
Option OCXO-C08 <0.1 ppm
Temperature
Stability		0℃ to 50℃ , with the reference 25℃
Standard <0.5 ppm
Option OCXO-C08 <0.005 ppm
Aging RateStandard <1 ppm/year
Option OCXO-C08 <0.03 ppm/year
Frequency
Marker Frequency Resolutionspan/(number of sweep points – 1)
Marker Frequency Uncertainty±(marker frequency readout × reference frequency accuracy + 1% × span + 10% ×
resolution bandwidth + marker frequency resolution)
Resolution1 Hz
Uncertainty±(marker frequency readout × reference frequency accuracy + counter resolution)
RangeStandard 0 Hz, 100 Hz to maximum frequency
Option RSA3000-BW1 0 Hz, 10 Hz to maximum frequency
Resolution2 Hz
Uncertainty±span/(number of sweep points – 1)
Carrier Offset1 kHz <-90 dBc/Hz (typical)
10 kHz <-100 dBc/Hz, <-102 dBc/Hz (typical)
100 kHz <-100 dBc/Hz, <-102 dBc/Hz (typical)
1 MHz <-110 dBc/Hz, <-112 dBc/Hz (typical)
Amplitude
Rangefc ≥ 10 MHz
DANL to +30 dBm
DC Voltage50 V
CW RF Power+30 dBm, attenuation ≥ 40 dB, preamp off.
-10 dBm, attenuation = 20 dB, preamp on.
CW RF Power+33 dBm (2 W)
Logarithmic Scale1 dB to 200 dB
Linear Scale0 to reference level
Number of Display Points801
Number of Traces6
Trace Detectornormal, pos-peak, neg-peak, sample, RMS average, voltage average, and
quasi-peak (Option RSA3000-EMC)
Trace Functionclear write, max hold, min hold, average, view, blank
Scale UnitdBm, dBmV, dBμV, nV, μV, mV, V, nW, μW, mW, W
General Specifications
Display
Typecapacitive multi-touch screen
Resolution1024 × 600 pixels
Size10.1”
Colour24-bit colour
Power
Input Voltage Range, AC100 V to 240 V (nominal)
AC Frequency45 Hz to 440 Hz
Power Consumption55 W (typical), max. 90 W with all options
Environment
TemperatureOperating Temperature
Range 0℃ to 50℃
Storage Temperature
Range -20℃ to 70℃
Humidity0℃ to 30℃ ≤ 95% RH
30℃ to 40℃ ≤ 75% RH
AltitudeOperating Height: below 3,048 m (10,000 feet)

Note*

Specifications are liable to change. For the full list of Specifications, please see the products datasheet located under the ‘Documentation’ tab.

1 review for Rigol RSA3015E-TG 1.5GHz Real-Time Spectrum Analyser

  1. martin-5924 (verified owner) –

    This spectrum analyser is perfect for my needs. This is my first real time SA, and I couldn’t be happier with it, the real time mode is really handy for finding those intermittent signals. The display is nice, clear and large. The touch screen is a nice feature, you can either use the touch screen or the hardware buttons to get into any of the functions of the SA, even entering frequencies, it is pretty well implemented. Mine came with the license for EMC functions which I loaded in and will be using for pre-compliance testing.

Only logged in customers who have purchased this product may leave a review.

Related products

Mandatory Accessories …

Optional Accessories …