Micsig STO1102E Plus 2CH, 100MHz, 1GSa/s Battery Handheld Oscilloscope

Description

Micsig STO1102E Plus Battery Handheld Oscilloscope

The Micsig STO1102E is a 100MHz, 2 Channel Battery Handheld Oscilloscope that adopts the innovative operation way, mixing full touch operation, buttons and knobs operation, and both ways mixed, bringing you a new user experience. It is not a traditional bench oscilloscope any more, with a large capacity lithium battery, makes this a really good choice for in-filed use. Up to 70Mpts memory depth and maximum 130,000wfm/s capture rate help you to solve more problems.

Features:

• Bandwidth – 100MHz
• Analogue Channels – 2
• Sample Rate – 1GSa/s (Single Channel)
• Rise Time – ≤3.5ns
• Memory Depth – 70Mpts（single channel）
• Max Capture Rate – 130,000 wfm/s
• Bandwidth Limitation – 20MHz, high pass, low pass
• I/O Port – Wi-Fi, LAN, HDMI, USB Host, USB Device, DC Power, Aux out
• APP – Support Android / iOS
• Built-In Storage Capacity – 8G
• Display – 8″ Industry TFT LCD touchable capacitive screen, resolution: 800*600 pixels, 14*10 grids
• Dimensions – 280*180*50mm
• Trigger Type – Edge, Pulse Width, Logic, Video, Runt, Time Out , N Edge, Slope
• Automatic Measurements – Period, Frequency, Rise Time, Fall Time, Delay, Positive duty Cycle, Negative Duty Cycle, Positive Pulse Width, Negative Pulse Width, Burst Width, Positive Overshoot, Negative Overshoot, Phase, Peak to Peak, Amplitude, High, Low, Max, Min, Mean, Cycle Mean, RMS, Cycle RMS.
• Weight – Oscilloscope body 1425g, battery 320g
• Serial Bus Trigger and Decode – UART, CAN, LIN, SPI, I2C, 1553B and 429
• Battery – 7.4V 7500mAh Lithium

Included As Standard:

• 2 x P130A 200MHz x10 passive probes
• 1 x Unit Power Adaptor Input 100~240V, 50~60Hz, 2A; output DC12V/5A
• 1 x Power Cord
• BNC caps, 3pcs for 2 channel, 5 pcs for 4 channel
• User instructions
• Packing list card
• Screen protector film
• 7.4V, 7500mAh detachable battery

Micsig STO1000E Plus Oscilloscope Comparison Table