Telonic extends its instrumentation range with three instruments from Siglent Technologies’ A-Line family: the SNA5000A vector network analyser (VNA), the SDS6000A oscilloscope and the SDG7000A arbitrary function generator.

Siglent’s first two- or four-port vector network analyser, the SNA5000A, meets the demand for high-performance measurement in radio and cellular networks and is ideal for the measurement of passive or active components, verification of two-port networks or adaptation of antennas.

The SNA5000A is offered as a two- or four-port device with frequency ranges from 9 kHz to 4.5 GHz or 8.5 GHz. It supports two- / four-port S-parameters and differential S-parameter measurements. Time domain analyses can be performed with the Time Domain Analysis option – SNA5000-TDA or Advanced Time Domain Analysis (the SNA5000-TDR).

The versatile VNA allows users to choose one-port, extended one-port, full two-port correction and SOLT (Short-Open-Load-Thru), SOLR (Short-Open-Load-Reciprocal) or TRL (Thru-Reflect-Load) techniques. There are five types of sweep: linear and logarithmic frequency sweeps, output power sweeps, time domain sweeps and segmented sweeps.

The SNA5000A includes a formula editor and mask test and has a large 12-inch touchscreen.

The SDS6000A oscilloscope is available in 500 MHz, 1 GHz and 2 GHz bandwidths. A low noise input stage and high sampling rate ensures signal integrity in bandwidth measurements. It also offers 5 GS/s per channel and ESR (Enhanced Sample Rate) for equivalent sample rates up to 10 GS/s per channel. It is engineered to precisely capture even the smallest signals on the vertical range (500 µVdiv) with input stage performance of SFDR > 45 dBc, channel-to-channel isolation up to 70 dB and DC amplifier accuracy +/- 1.5%.

The SDS6000A oscilloscope features eye diagrams and jitter analysis and an acquisition memory up to 500 Mpts over one, two or four channels. The waveform capture rate can reach up to 750,000 waveforms / s in sequence mode.

Other features are digital and zone triggers, history function, mask test, Bode plot and a I2C, SPI, UART, CAN, LIN as standard. The SDS6000A can optionally be expanded by 16 digital channels and an external function generator (25 MHz). Additional serial bus decoders (CAN-FD, FlexRay, MIL1553, I2S, SENT, Manchester) are also available.

In addition to a large 12-inch touchscreen, mouse or keyboard input options, an external monitor can be connected via HDMI and an optional micro SD card expands the space available for recorded data.

The most recent addition to the A-Line series is the SDG7000A two-channel arbitrary function generator. Offered in 350 MHz, 500 MHz and 1 GHz bandwidths, it features two independent channels which can be combined via menu control to simulate interference on the main signal or to generate complex modulated signals.

Ideally suited to developing embedded electronics systems, the SDG7000A arbitrary function generator has sine, square, triangle, and pulse waveforms as standard. Other standard features include Pseudorandom Bit Sequence (PRBS) and 512 MPt memory for creating custom signals.

Siglent’s TrueArb technology guarantees waveform fidelity at up to 2.5 GS/s sample rate with minimal jitter. User-defined signals can be generated with Siglent EasyWave software or directly on the device display. It is also possible to import arbitrary curves from text or CSV files. In sequence mode, users can sequence up-to 1024 waveform segments for more complex waveform creation.

The maximum output voltage is up to 12 Vpp into a 50Ω external load and when sourcing signals into a high-impedance environment, up to 24 Vpp is possible. Outputs can be configured as single-ended or differential. The choice of FM, AM, PM modulation and optional digital IQ modulation allows baseband I and Q signals as well as HF-modulated signals up to 1 GHz and 500 MS/s to be generated. Up to 16 digital signals can be sourced via TTL or LVDS bus modules with data rates up to 1 Gbps.

The SDG7000A Series is equipped with a 5-inch touch display.
All of Siglent’s new performance line of instruments included a web control interface that provides remote instrument control without additional software.

Telonic Instruments is a specialist distributor for Test Instruments and Programmable AC and DC Power Supplies from industry leading manufacturers including Kikusui, Delta Elektronika, Lab-Power, ETL Pruftechnik, Rigol, Siglent, Brymen, Danisense, Tekbox, Graphtec, Sensepeek, Microtest, JBC and Micsig.

Based in Wokingham, Berks, Telonic has been supporting the electronics, automotive, aerospace, education, manufacturing, research and development sectors with sales, service, calibration and hire in the UK for over 50 years.

SIGLENT’s SDG7000A is a family of dual-channel Arbitrary Waveform Generators that feature up to 1 GHz bandwidth, a maximum sample rate of 5 GSa/s and 14-bit vertical resolution. It can generate arbitrary waveforms point by point with a maximum 2.5 GSa/s sample rate and vector signal with a maximum 500 MS/s. It also has the ability to generate a variety of signals such as continuous wave, Pulse, Noise, PRBS patterns, and a 16-bit digital bus. It supports the generation of complex signals such as modulation, sweeping, bursting and dual channel copying/coupling/tracking and superposition. The outputs are differential/single-ended and support a maximum output range of ± 24 V. The instrument can ensure a large amplitude under high-frequency which eliminates an external power amplifier in some applications and addresses a wider range of requirements.

Frequency:

350MHz, 500MHz, 1GHz Models | Channels: 2 | Max Sampling Rate: 5GSa/s

• Dual channel differential/single-ended output, 16-bit LVDS/LVTTL digital bus output.
• Generates vector signals with up to 500 MS/s symbol rate.
• Generates low jitter pulses with 1 ns minimum pulse width and 500ps minimum edge.
• Up to 1 GHz bandwidth White Gaussian Noise and the bandwidth is adjustable.
• Supports PRBS up to 312.5 Mbps.
• The digital bus can output digital signals up to 1 Gbps.
• Supports analog/digital modulation, sweeping and bursting.
• Enhanced dual channel operation functions: inter channel tracking, coupling and copying; Dual channel superposition function; Supports mutual modulation between channels.
• The 24 Vpp analog output is superimposed with ± 12 Vdc offset to provide a maximum output range of ± 24 V (48 V).
• High precision Frequency Counter
• 5-inch capacitive touch screen with resolution of 800×480; Supports external mouse and keyboard operation; Supports WebServer to control the instruments remotely.
• Supports multiple interfaces: 10MHz In, 10MHz Out, Trigger In/Out, Markers etc.
• Supports SCPI command for easy integration into test systems.

Bidirectional DC power Supplies are fast becoming the go to power supply for all Motor, Powertrain, Inverter and Battery Testing as they combine a DC power supply and DC electronic Load in one box.

Telonic have increased our Rental / Hire inventory of DC power Supplies to now include all Bidirectional DC Power Supplies from Delta Elektronika.

Bidirectional DC power Supplies Models available for Rental / Hire Include:

SM 70-CP-450 (Bi-directional operation)
Voltage 0 – 70 V  Current -450 .. 450 A

SM 500-CP-90 (Bi-directional operation)
Voltage 0 – 500 V Current -90 .. 90 A

SM 210-CP-150 (Bi-directional operation)
Voltage 0 – 210 V-150 .. 150 A

SM 1500-CP-30 (Bi-directional operation)
Voltage 0 – 1500 V Current -30 .. 30 A

Need a Higher Power Bidirectional DC power Supply:

All of the Bidirectional Supplies shown above have a maximum input and output capability of 15kW, however this can be expanded by running multiple units in parallel.

Bidirectional DC power Supplies Applications Include:

Batteries
Super capacitors
Fuel Cells
Electrical Energy Storage Devices
Car testing systems
E-Drive Powertrains
Solar inverter testing
PV-Simulation
Plasma Surface Technology
Aerospace and military equipment
Controlled battery discharging

How much does it cost to Rent or Hire a Bidirectional DC power Supply ?

Telonic’s rental / hire costs are among the most competitive in the industry, all charges are shown on our website and can be found using the following links.

SM 70-CP-450 (Bi-directional operation)
Voltage 0 – 70 V  Current -450 .. 450 A

SM 500-CP-90 (Bi-directional operation)
Voltage 0 – 500 V Current -90 .. 90 A

SM 210-CP-150 (Bi-directional operation)
Voltage 0 – 210 V-150 .. 150 A

SM 1500-CP-30 (Bi-directional operation)
Voltage 0 – 1500 V Current -30 .. 30 A

Standard features for these Bidirectional power supplies is Delta’s new Power Recovery [Regeneration] Technology: in sink mode they can return full power back into the grid and, thanks to an efficiency of 95%, there is no need for expensive water cooling systems. The flexible output covers the output range of five separate power supplies with a traditional rectangular VI-curve.