Description
Rental Siglent SDG7102A Arbitrary Function Generator
The SDG7102A is a 2CH, 1GHz Function Generator with a maximum sampling rate of 5GSa/s. Siglent’s SDG7000A is a series of dual-channel Pulse/Arbitrary waveform generators that feature up to 1GHz bandwidth, a maximum sample rate of 5 GSa/s and 14-bit vertical resolution. It can generate arbitrary waveforms point by point with a maximum 2.5 GSa/s sample rate and vector signal with a maximum 500 MS/s. It also has the ability to generate a variety of signals such as continuous wave, Pulse, Noise, PRBS patterns, and a 16-bit digital bus. It supports the generation of complex signals such as modulation, sweeping, bursting and dual channel copying/coupling/tracking and superposition. The outputs are differential/single-ended and support a maximum output range of Β± 24 V. The instrument can ensure a large amplitude under high-frequency which eliminates an external power amplifier in some applications and addresses a wider range of requirements.
- Dual channel differential/single-ended output, 16-bit LVDS/LVTTL digital bus output.
- Generates vector signals with up to 500 MS/s symbol rate.
- Generates low jitter pulses with 1 ns minimum pulse width and 500ps minimum edge.
- Up to 1 GHz bandwidth White Gaussian Noise and the bandwidth is adjustable.
- Supports PRBS up to 312.5 Mbps.
- The digital bus can output digital signals up to 1 Gbps.
- Supports analogue/digital modulation, sweeping and bursting.
- Enhanced dual channel operation functions: inter channel tracking, coupling and copying; Dual channel superposition function; Supports mutual modulation between channels.
- The 24 Vpp analogue output is superimposed with Β± 12 Vdc offset to provide a maximum output range of Β± 24 V (48 V).
- High precision Frequency Counter
- 5-inch capacitive touch screen with resolution of 800×480; Supports external mouse and keyboard operation; Supports WebServer to control the instruments remotely.
- Supports multiple interfaces: 10MHz In, 10MHz Out, Trigger In/Out, Markers etc.
- Supports SCPI command for easy integration into test systems.
Siglent SDG7000A Function Generator Comparison Table
| MODEL | MAX OUTPUT FREQUENCY | MAX SAMPLING RATE | VERTICAL RESOLUTION | WAVEFORM LENGTH | CHANNELS |
|---|
| SDG7032A | 350MHz | 5GSa/s | 14-bit | 512Mpts/ch | 2 Differential/Single-ended |
| SDG7052A | 500MHz | 5GSa/s | 14-bit | 512Mpts/ch | 2 Differential/Single-ended |
| SDG7052A | 1GHz | 5GSa/s | 14-bit | 512Mpts/ch | 2 Differential/Single-ended |
| Square | | | | | |
|---|
| Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
| Resolution | 1ΞΌ | | | Hz | |
| Standard time base | | | | | |
| Initial Accuracy | -1 | | +1 | ppm | 25β |
| -2 | | +2 | ppm | Β 0 ~ 50 β |
| 1st-year aging | -0.5 | | +0.5 | ppm | |
| 20-year aging | -3.0 | | +3.0 | ppm | |
| OCXO Option | | | | | |
| Frequency | | 10M | | Hz | |
| Initial Accuracy | -100 | | +100 | ppb | 25β |
| Temperature stability | -1 | | +1 | ppb | 0 ~ 50 β |
| 1st-year aging | -50 | | +50 | ppb | |
| Sine Characteristics | | | | | |
|---|
| Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
| Frequency | 1ΞΌ | | 1G | Hz | SDG7102A |
| Harmonic Distortion (Sinle-ended) | | | -55, -40 | dBc | β€500MHz, 0 dBm,Β οΌ500MHz, 0 dBm |
| Total Harmonic Distortion (Differential) | | | -55, -45 | dBc | β€500MHz, 0 dBm,Β οΌ500MHz, 0 dBm |
| Non Harmonic Spurious (Single-ended) | | | -65 | dBc | 0 dBm |
| Non Harmonic Spurious (Differential) | | | -60 | dBc | 0 dBm |
| Phase noise | | Β -138 | | dBc/Hz | 10 MHz@19kHz,Β 0dBm |
| Custom harmonic number | | | 16 | Β order | |
| Custom harmonic number | Even, Odd, All | Even, Odd, All | Even, Odd, All | Even, Odd, All | Even, Odd, All |
| Arbitrary Wave Characteristics | | | | | |
|---|
| Parameter | Min. | Typ. | Max. | Unit | Condition |
| Waveform Length | 24 | | 512M | pts | In sequence mode, when the
segmentsοΌ1. The minimum
waveform length is 64. When the
length is less than 256 points, it
must be an integer multiple of 16
points |
| Sampling Rate | 0.01 | | 2.5G | Sa/s | |
| Vertical Resolution | | 14 | | bit | The data storage format is 16-bit |
| Jitter | | | 50 | ps | Cycle to Cycle RMS
value , β010101β pattern, 1 Vpp,50 Ξ©
load, 2.5 GSa/S |
| Interpolation mode | | | | | 0-order hold, linear, sinc, sin27, sinc13 |
| Sequence | | | | | Up to 1024 segments. Each segment can be repeated for
1~65535.
Run mode: Continuous, Single/Burst, Infinite, Stepped,
Advanced
Trigger source: Button, Timer, External |
| Source | | | | | Build-In, From File, EasyWaveX |
| DC Characteristics | | | | | |
|---|
| Parameter | Min. | Typ. | Max. | Unit | Condition |
| Output Range | -6, -12 | | +6, +12 | V | 50Ξ© load, HiZ load |
| Accuracy | | | Β±(1%+2mV) | | HiZ load |
| General Specifications | | | | | |
|---|
| Power | | | | | |
| Parameter | Min. | Typ. | Max. | Unit | Condition |
| Voltage | | | | | 100 – 240 Vrms (Β± 10%), 50 / 60 Hz 100 – 120 Vrms (Β± 10%), 400 Hz |
| Power Consumption | | 90 | 110 | W | Dual channels, Sine, 1kHz, 10Vpp, 50Ξ© load |
| Touch Screen | | | | | |
| Parameter | Min. | Typ. | Max. | Unit | Condition |
| Dimensions | | 5.0 | | inch | |
| Resolution | | 800×480 | | Pixel | |
| Colour Depth | | 24 | | bit | |
| Contrast Ratio | Β 500 | 600 | | | |
| Luminance | Β 200 | 250 | | cd/m2 | |
| Touch Screen Type | | | | | Capacitive |
| Environment | | | | | |
| Parameter | Min. | Typ. | Max. | Unit | Condition & Note |
| Operating temperature | 0 | | 50 | β | |
| Non-operating temperature | -20 | | 60 | β | |
| Operating humidity | 5, 5 | | 90, 50 | %RH | 30 β, 50 β |
| Non-operating humidity | 5 | | 95 | %RH | |
| Operating altitude | | | 3048 | m | 254 |
| Nonβoperating altitude | | | 12192 | m | |
Note* Specifications are liable to change. For the full list of Specifications, please see the products datasheet located under the βDocumentationβ tab.
Only logged in customers who have purchased this product may leave a review.
Rigol SDG7000A Datasheet
Reviews
There are no reviews yet.