| Bandwidth limitation |
20MHz, high pass, low pass |
| Input coupling |
DC, AC, GND |
| Input impedances |
1MΩ ±1%||14.5pF±3pF |
| Vertical resolution |
8bits |
| DC gain accuracy |
＜±2% ( 1MΩ ) |
| vertical scale |
1mV/div to 5V/div ( 1MΩ ) |
| Channel to channel |
≥40dB ( 100:1 ) |
| Offset range |
±6div |
| Maximum input voltage |
CAT I 300V ( 1MΩ ) |
| Horizontal System |
|
| Time base range |
2ns/div ~ 1ks/div |
| Time base delay range |
-14 divisions to 14ks |
| Time base accuracy |
±20ppm |
| Sampling System |
|
| Sampling mode |
Real time sample rate |
Peak sampling
Sample rate 1G Sa/s |
All the sampling glitches in scanning rate are narrow to single channel 1 ns, dual
channel 2 ns .four channel 4ns |
| Max duration in the max sampling rate |
Sample Rate 1GSa/s: 28/14ms
Sample Rate 500MSa/s: 56/28ms
Sample Rate 250MSa/s: 56/28ms |
| Average |
Average of sampling for N times
N is chosen from 2, 4, 8, 16, 32, 64, 128, 256 |
| Envelope |
Envelope of sampling for N times
N is chosen from 2, 4, 8, 16, 32, 64, 128, 256 |
| Trigger and Decoding System |
|
| Trigger mode |
Normal, Auto, and Single |
| Trigger coupling |
DC, AC, HF reject( >50KHz ), LF reject( <50KHz ), noise reject |
| hold off range |
200ns to 10s |
| Trigger type |
|
| Edge |
Positive, negative, or either slope on any channel input. Coupling includes DC, AC, HF reject, LF reject, and noise reject. |
| Pulse Width |
Trigger on width of positive or negative pulses that are＞, ＜, ＝, ≠, or inside/outside a specified period of time (8ns~10s) |
| Logic |
Trigger when any logical pattern of channels goes false or stays true for specified period of time (8ns~10s). Any input can be used as a clock to look for the pattern on a clock edge. Pattern (AND, OR, NAND, NOR) specified for all input channels defined as High, Low, or Don’t Care |
| Video Trigger |
Trigger on all lines or individual lines, odd/ even or all fields on PAL/625SECAM、NTSC/525、720P、 1080I、1080P video signals. |
| Time Out |
Trigger on an event which remains high, low, or either, for a specified time period. |
| Slope |
Positive slope (Great than, lower than, within specific interval)
Negative slope (Great than, lower than, within specific interval) |
| Runt |
Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again. Event can be time- or logic qualified. |
| Nth Edge |
Edge type: Rising, Falling
Idle time: 16ns to 4s
Number of edges 1 to 65535 |
| General Specification |
|
| Power Source Voltage |
100 to 240V AC, 50/60Hz |
| Power Consumption |
＜60W |
| Fuse |
12V DC, 5A |
| Built-In Battery (Optional) |
7.4V, 8000mAh |
| Temperature |
Operating: 0℃ to 45℃
Non-Operating: -40℃ to 60℃ |
| Humidity |
Operating: 5% to 85%, 25℃
Non-Operating: 5% to 90%, 25℃ |
| Altitude |
Operating:＜3000m
Non-Operating:＜12000m |
| Dimensions |
Height: 210mm, Width: 250mm, Depth: 55mm |
| Weight |
2CH Bare 1040g
4CH Bare 1125g |
Steven P –
Was looking for a portable oscilloscope for doing some onsite work, very impressed how easy this is to use.
J A –
Ordered online and the unit arrived to following day.
Jason K –
Have used scopes the size of a bus for too many years.
Touch screen all the way…
Mike S –
I am a freelance software engineer who can never seem to get hold of a scope when needed (“softies don’t need scopes”). So I bought one of these. It has already proved useful debugging a problem with a serial port which was not caused by software. Saved me a lot of time. It is easy to use and very portable. The automatic setup feature was very useful setting up for decoding data on a UART port.
Nick J –
Liked the reviews on this scope, it’s hardware etc. Good purchase from Telonic, friendly advice etc. Best option for UK purchase.