Kikusui TOS7200 Electrical Safety Testers 25 to 1000V max 1milli A

. (£0.00 inc VAT)

Please Call For More Information On Pricing.

Available on back-order, delivery normally 1 week

Availability: Stock models delivered next working day (UK only) for orders placed before 15:00 (Mon - Fri)

Free Shipping Free Calibration Price Match Guarantee
SKU: TOS7200 Category:


Kikusui TOS7200 Safety Tester

The TOS7200 is an insulation resistance tester which can be used on a wide range of various electric and electronic components, as well as electric and electronic equipment. Output voltage can be set from -25 to -1000 Vdc with a resolution of 1 V. As it is fitted with a window comparator and timer function, the tester is capable of efficiently conducting insulation resistance tests based on various safety standards. In addition, this product is equipped with panel memory as standard feature, which can be recalled by remote control, SIGNAL I/O connector, and the RS-232C interface for easy automatic testing system construction.


  • Provided with the discharge function
  • Equipped with the window comparator
  • Hold function (which holds the measured resistance at the end of testing while PASS judgment is being output)
  • Provided with the timer function
  • Rear output terminals
  • Measured-value monitoring terminals
  • Equipped with the panel memory (enabling 10 different settings to be stored)
  • Equipped with the SIGNAL I/O connector and remote control terminal
  • Equipped with the RS-232C interface as standard


TOS7200 Specifications
Model TOS7200
Output Section
Output voltage range -25 V to -1000 V
Resolution 1 V
Accuracy ±(1.5 % of setting + 2 V)
Maximum rated load 1 W (1 000 V/1 mA)
Maximum rated current 1 mA
Output terminals
Output type Floating
Isolation voltage ±1000 VDC
1000 V / under no load 2 Vp-p or less
Maximum rated load 10 Vp-p or less
Short-circuiting current 12 mA or less
Output rise time 50 ms or less (10 % to 90 %) [no load]
Discharge function Forced discharge at the end of test (discharge resistance: 25 kΩ)
Measurement range 0 V to -1200 V
Resolution 1 V
Accuracy ±(1 % of reading +1 V)
Resistance Meter
Measurement range 0.01 MΩ to 5000 MΩ (In the range of over 100 nA to a maximum rated current of 1 mA)
Display R < 10.0 MΩ – 10.0MΩ ≤ R < 100.0MΩ – 100.0MΩ ≤ R < 1000MΩ – 1000MΩ ≤ R ≤ 5000MΩ

□.□□ MΩ – □□.□ MΩ – □□□ MΩ – □□□□ MΩ

Accuracy 100 nA < i ≤ 200 nA, 200 nA < i ≤ 1 µA,   1 µA < i ≤ 1 mA

± (10 % of reading),    ± (5 % of reading), ± (2 % of reading)

[In the humidity range of 20 %rh to 70 %rh (no condensation), with no disturbance such as swinging of the test leadwire]

Measurement range The current measurement range is selectable between AUTO and FIX.
AUTO Automatically changes the current measurement range according to the measured current value.
FIX Fixes the current measurement range based on the output voltage set value and LOWER set value (in UPPER OFF status).
Holding function Holds the resistance value obtained at the end of testing while a PASS judgment is being output.
Installation location Indoors and at altitudes up to 2000 m
Warranty range Temperature: 5 °C to 35 °C

Humidity: 20 %rh to 80 %rh (no condensation)

Operating range Temperature: 0 °C to 40 °C

Humidity: 20 %rh to 80 %rh (no condensation)

Storage range Temperature: -20 °C to 70 °C

Humidity: 90 %rh or less (no condensation)

Power Requirements
Nominal voltage range (allowable voltage range) 100 V to 240 V AC (85 V to 250 V AC)
Power consumption at rated load 30 VA maximum
Allowable frequency range 47 Hz to 63 Hz
Insulation resistance 30 MΩ or more (500 V DC) [AC LINE to chassis]
Hipot 1390 V AC for 2 seconds, 10 mA or less [AC LINE to chassis]
Ground bond 25 A AC / 0.1 Ω or less

Note* Specifications are liable to change. For the full list of Specifications, please see the products datasheet located under the ‘Documentation’ tab.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Optional Accessories …