Rigol DSG5204 4 Channel 9kHz-20GHz RF Signal Generator

£126860.00 (£152,232.00 inc VAT)

Available on back-order

Description


Rigol DSG5204 4 Channel 9kHz-20GHz RF Signal Generator

RIGOL Technologies EU GmbH presents a new microwave generator with two different frequency ranges of 9 kHz to 12 GHz and 20 GHz respectively. The instruments of the DSG5000 series are optionally available as versions with 2, 4, 6 or 8 channels, which have a channel-to-channel isolation of up to 85 dB(typ.).

The frequency, amplitude, and all available functions can be set and output individually for each channel or as a group for a desired number of channels.

Depending on the frequency range, the amplitude can be adjusted from -30 dBm to +25 dBm. This series is also characterized by a very low phase noise (e.g. -133 dBc/Hz @ 1 GHz, 10 kHz (typ.)). The harmonics are up to 50 dBc below the carrier, which underlines a very accurate interference-free signal generation.

The amplitude and frequency switching time is <3 ms. RIGOL’s patented fully digital amplitude control technology offers <0.7 dB (typ.) amplitude accuracy. But the generator is also impressive when it comes to frequency accuracy: The frequency accuracy of the 10MHz reference is +/-1 ppm (optional with OXCO; +/-10 ppb). If several channels with the same phase haveto be output highly synchronously, this is easily possible with the device.

The generator offers a long-term phase stability of e.g. <1° @10 GHz as well as an individual phase change, which are ideal for lengthy tests. The analogue modulation forms such as analogue[AM], frequency[FM] and phase[PM] can be generated over the entire frequency range from 1 MHz via single or all channels. The device also offers the possibility to use pulse modulation with a typical rise/fall time of 20 n sec over the same frequency range. set. Depending on the carrier frequency, the on/off level can be as high as 80 dB (typ.). The DSG5000 series also offers the pulse train function with up to 2047 pulse patterns, for example to create a desired radar profile. Here, too, the pulse widths of the on/off areas can be adjusted as needed from 20 nsec. up to 170 sec.. The integrated sweep function can be used as a list or by means of a selected increment for both the amplitude and the frequency or both in combination

Features:

  •  Multi-channel with up to 8 channels, support multi-device rack mount
  • Channel-to-channel phase stability < 1°@10GHz, resolution of phase offset setting adjustable in 0.01 ° steps
  • Fast switching speed 3 ms
  • Output max. available power up to 25 dBm
  • Low phase noise below -133 dBc/Hz@1 GHz, 10 kHz offset

Rigol DSG5000 RF Signal Generator Comparison Table

Model Maximum Frequency Amplitude Range Amplitude Accuracy Phase Noise Modulation function Interface Channels Manufacturer
DSG5122 9 kHz ~ 12 GHz
-30 dBm~+25 dBm
±1.1 dB
<-133 dBc/Hz AM/FM/ØM/Pulse USB 3.0, LAN, HDMI 2
DSG5124
9 kHz ~ 12 GHz
-30 dBm~+25 dBm
±1.1 dB
<-133 dBc/Hz AM/FM/ØM/Pulse USB 3.0, LAN, HDMI 4
DSG5126 9 kHz ~ 12 GHz -30 dBm~+25 dBm
±1.1 dB
<-133 dBc/Hz AM/FM/ØM/Pulse USB 3.0, LAN, HDMI 6
DSG5128 9 kHz ~ 12 GHz -30 dBm~+25 dBm ±1.1 dB <-133 dBc/Hz AM/FM/ØM/Pulse USB 3.0, LAN, HDMI 8
DSG5202
9 kHz ~ 20 GHz
-30 dBm~+25 dBm
±1.1 dB <-133 dBc/Hz AM/FM/ØM/Pulse USB 3.0, LAN, HDMI 2
DSG5204 9 kHz ~ 20 GHz
-30 dBm~+25 dBm
±1.1 dB
<-133 dBc/Hz AM/FM/ØM/Pulse USB 3.0, LAN, HDMI 4
DSG5206 9 kHz ~ 20 GHz -30 dBm~+25 dBm ±1.1 dB
<-133 dBc/Hz
AM/FM/ØM/Pulse USB 3.0, LAN, HDMI 6
DSG5208
9 kHz ~ 20 GHz
-30 dBm~+25 dBm
±1.1 dB
<-133 dBc/Hz AM/FM/ØM/Pulse USB 3.0, LAN, HDMI 8

Documentation


Datasheet

DSG Datasheet



User Guide

DSG5000 User Guide



Programming Guide

DSG5000 Programming Guide


Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.