The 6630-30 precision LCR meter (10 Hz to 30MHz), it is suitable for the LCR testes of AC signals. The measurement in a continuously changing environment can be executed stage-by-stage with the test frequency and grade, and high-speed continuous tests can be performed under different test and mode conditions. The 6630-30 has output impedance 25Ω/100Ω can be switched, Auto Level control(ALC) , List mode function. Comparator function and Handler BIN classification function for component good and defective product classification. It supports RS-232, GPIB, Handler, LAN, USB Host/Device.
The 6630-30 also supports a variety of fixtures, such as liquid dielectric material test fixture, dielectric material test fixture and magnetic material test fixture
Features:
Signal Source Frequency Range: 10Hz – 30MHz
Basic accuracy up to ±0.05%
ALC function
Output impedance 25Ω/100Ω, switchable
Support meter mode and list mode, can used with various fixtures, such as: liquid dielectric material test fixture, dielectric material test fixture and magnetic material test fixture
Ultra-high measuring speed < 3ms
Open circuit/short circuit/load calibration function
Up to four component parameters can be selected in the electric meter mode. The induction and DCR values can be measured and displayed simultaneously
Auto component classification: Comparator function and Handler BIN classification function
Support RS-232, GPIB, Handler, LAN, USB Host/Device interfaces
Test Signal Voltage Level: 10mV – 2Vrms(Ro 100Ω), 10mV – 1Vrms(Ro 25Ω)
Voltage Minimum Resolution: 1mV
Accuracy: ALC ON 6％ * Voltage ± 2mV, ALC OFF：10％ * Voltage ± 2mV
Test Signal Current Level: 200µA – 20mArms
Current Minimum Resolution: 10µA
Accuracy: ALC ON：6％ * Current ± 20µA, ALC OFF：10％ * Current ± 20µA
Microtest 6630 Datasheet
Reviews
There are no reviews yet.