Kikusui TOS5200 AC Flash Tester / HiPot Tester 0-5000V 0-100mA (200mA S/C)

£1202.00 (£1,442.40 inc VAT)

2 in stock (can be backordered)

Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)

SKU: TOS5200 Categories: ,

Kikusui TOS5200 Safety Tester

TOS5200 0-5kV AC Flash Tester features 500 VA capacity and 200 mA short circuit current output capability. Equipped with the PWM amplifier, the TOS5200 can provide a stable & reliable output without being affected by the AC power line. Therefore, it is a perfect solution for safety testing electronic equipment or devices complied to IEC, EN, UL, VDE and JIS etc. requirements.
As TOS5200 covers most of features of our advanced model for AC HiPot Test, it has a superb cost / performance ratio for those who need 200 VA or 500 VA capacity, or both. Also comes equipped the Interlock function together with other safety features.

Supplied with..

  • New Calibration Certificate (Traceable to National Standards)
  • Test Leads
  • Mains Lead
  • Operation Information.

Features:

  • High stability.
  • 5kV / 100mA (500VA) AC withstand Voltage
  • High-precision measurement ± 1.5% of reading
  • Rise time / fall time control
  • Key lock & operation cover
  • USB, RS-232C interface equipped

Description


Documentation

TOS5200 Specifications
Model TOS5200
AC Output Section
Output Range 0.05 kV to 5.00 kV
Setting Accuracy ± (2 % of set + 20 V) [at no load]
Setting Range 0.00 kV to 5.50 kV
Resolution 10 V STEP
Max. rated output 500 VA (5 kV/100 mA)
Max. rated voltage 5kV
Max. rated current 100 mA [output voltage 0.5 kV or higher]
Transformer rating 500 VA
Output voltage waveform Sine
Distortion If the output voltage is 0.5 kV or more: 3 % or less (when no load or a pure resistive load is connected)
Crest factor Within √2 ± 3 % (output voltage 800 V or higher, at no load)
Frequency 50 Hz or 60 Hz
Accuracy ± 0.5 % (excluding during voltage rise time)
Voltage regulation 10 % or less (when changing from maximum rated load to no load)
Input voltage variation ±0.3 % (5 kV when no load is connected; power supply voltage: 90 V to 250 V)
Short-circuit current 200 mA or more (when the output voltage is 1.0 kV or greater)
Output method PWM switching
Start voltage The voltage at the start of withstanding voltage tests can be set to 50 % of the test voltage.
Limit voltage The test voltage upper limit can be set . AC: 0.00 kV to 5.50 kV
Output voltage monitor feature If output voltage exceeds the specified value + 350 V or is lower than the specified value – 350 V,
output is turned off, and protective features are activated.
Voltmeter (Digital)
Measurement range 0.000 kV to 6.500 kV AC
Display □.□□□ kV
Accuracy V < 500 V: ± (1.5 % of reading + 20 V), V ≥ 500 V: ±1.5 % of reading
Response True rms, Average value response/rms display switchable
Hold feature After a test is finished, the measured voltage is retained until the PASS or FAIL judgment is cleared
Ammeter (Digital)
Measurement range 0.00 mA to 110 mA
Display i < 1 mA           1 mA ≤ i < 10 mA             10 mA ≤ i < 100 mA                 100 mA ≤ i
□.□□□ mA          □.□□□ mA                        □□.□□ mA                                    □□□.□ mA
Accuracy 1.00 mA ≤ i: ± (1.5 % of reading), i < 1.00 mA: ± (1.5 % of reading + 30 μA)
Response True rms/ Mean-value response rms display Can be switched
Hold feature After a test is finished, the measured current value is retained until the PASS judgment is cleared.
General Specification
Display LCD: LED back custom indicators
Environment
Installation location Indoors, at a height of up to 2000 m
Spec guaranteed range temperature/humidity 5 °C to 35 °C (41 °F to 95 °F)/20 %rh to 80 %rh (no condensation)
Operating range temperature/humidity 0 °C to 40 °C (32 °F to 104 °F)/20 %rh to 80 %rh (no condensation)
Storage range temperature/humidity -20 °C to 70 °C (-4 °F to 158 °F)/90 %rh or less (no condensation)
Power supply
Nominal voltage range (allowable voltage range) 100 VAC to 240 VAC (90 VAC to 250 VAC)
Power consumption 100 VA or less, 800 VA max.
Allowable frequency range 47 Hz to 63 Hz
Insulation resistance (between AC LINE and the chassis) 30 MΩ or more (500 VDC)
Withstanding voltage (between AC LINE and the chassis) 1500 Vac, 1 minute
Earth continuity 25 Aac, 0.1 Ω or less
Dimensions 320 (12.6″) (330(12.99″)) W × 132(5.2″) (150(5.91″)) H × 350(13.78″) (420(16.54″)) D
Weight Approx. 14 kg (30.9 lbs)

Note* Specifications are liable to change. For the full list of Specifications, please see the products datasheet located under the ‘Documentation’ tab.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Mandatory Accessories …

  • Kikusui TL31-TOS High-Voltage Test Lead

    .
    Add to basket
  • UK Power Cord

    .
    Read more

Optional Accessories …

  • Kikusui PL02-TOS Warning Light

    £311.00
    Add to basket
  • Kikusui HP01A-TOS High-Voltage Test Probe

    £256.00
    Add to basket
  • Kikusui DD-5P/9P Conversion cable(DIN to Mini DIN)

    £42.00
    Add to basket
  • Kikusui RC02-TOS Remote Control Box

    £180.00
    Add to basket
  • Kikusui RC01-TOS Remote Control Box

    £153.00
    Add to basket
  • Kikusui TU01-TOS Terminal Unit

    £222.00
    Add to basket
  • Kikusui HP02A-TOS High-Voltage Test Probe

    £271.00
    Add to basket
  • Kikusui TL31-TOS High-Voltage Test Lead

    £53.00
    Add to basket
  • Kikusui TL32-TOS High-Voltage Test Lead

    £68.00

    3 in stock (can be backordered)

    Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)

    Add to basket