CONTACT ACCOUNT

TEL: 0118 978 6911

Home / Knowledge Base (Page 7)

Knowledge Base

Three models with isolated 2, 3 and 4 outputs on each channel

Posted on: December 17th, 2020 by Doug Lovell

17/12/2020
Lineup: PMX32-3DU (2ch), PMX32-3TR (3ch) and PMX32-2QU (4ch). Each output is isolated. ...

Up to Five Different Models can be Connected in Parallel

Posted on: December 17th, 2020 by Doug Lovell

17/12/2020
Units may also be operated in parallel mode by simply connecting them together with the appropriate cable. Up to five different models can be connected together to flexibly deliver a high-capacity performance. (Maximum: 100 kW, 2000 A) ...

Sequence Function Allows the Generation of Any Test Sequence

Posted on: December 17th, 2020 by Doug Lovell

17/12/2020
Sequences are comprised of programs and steps, with each program being a series of multiple steps. Steps are numbered and executed in ascending order, and a single loop of the program is complete once the last step has been executed. The PLZ-5WH2 series supports the programming of up to 10,000 steps and 30 programs, allowing users to generate whatever test sequence their application requires. ...

The Capability to Perform a Variety of Load Tests in a Single Unit

Posted on: December 17th, 2020 by Doug Lovell

17/12/2020
The PLZ-5WH2 series includes a highly stable current control circuit for rapid response, so there is no need to redesign your circuit every time you change the settings. Users can set cut-off parameters for elapsed time or voltage drop or integrated current and integrated power. ...

How long will the DS2000A Capture a Signal

Posted on: December 16th, 2020 by Doug Lovell

16/12/2020
To determine how long an oscilloscope will capture a signal when it is operated in single trigger mode is determined by taking the instrument's memory depth and dividing it by the instrument's sample rate. The memory depth can be changed within the instrument's acquire menu and then the sample rate can be changed by adjusting the horizontal scaling. The table below lists the different memory d...

Activating the HDMI output on the MSO5000 & DS7000 scopes

Posted on: December 16th, 2020 by Doug Lovell

16/12/2020
The MSO5000 & DS7000 scopes have a HDMI output that can be used to connect to an external monitor or projector.The ouput will be defaulted to off so it will need to be activated when connected to an external monitor. To activate the HDMI output press Utility on the keypad and select IO on the right of the display. N...

How long will the MSO5000 Capture a Signal

Posted on: December 16th, 2020 by Doug Lovell

16/12/2020
To determine how long an oscilloscope will capture a signal when it is operated in single trigger mode is determined by taking the instrument's memory depth and dividing it by the instrument's sample rate. The memory depth can be changed within the instrument's acquire menu and then the sample rate can be changed by adjusting the horizontal scaling. The table below lists the different memory d...

How long will the DS7000 Capture a Signal

Posted on: December 16th, 2020 by Doug Lovell

16/12/2020
To determine how long an oscilloscope will capture a signal when it is operated in single trigger mode is determined by taking the instrument's memory depth and dividing it by the instrument's sample rate. The memory depth can be changed within the instrument's acquire menu and then the sample rate can be changed by adjusting the horizontal scaling. The table below lists the different memory d...

How long will the DS1000Z Capture a Signal

Posted on: December 16th, 2020 by Doug Lovell

16/12/2020
To determine how long an oscilloscope will capture a signal when it is operated in single trigger mode is determined by taking the instrument's memory depth and dividing it by the instrument's sample rate. The memory depth can be changed within the instrument's acquire menu and then the sample rate can be changed by adjusting the horizontal scaling. The table below lists the different memory d...

Printing to a USB stick from MSO5000/DS7000 series scopes

Posted on: December 16th, 2020 by Doug Lovell

16/12/2020
Pressing the green Quick keypad button will send a snapshot of the screen directly to a USB stick plugged into the front of the scope. The Quick key provide multiple functions so it will need to be set to Print. To do this press the Utility keypad button then More and then Quick settings on the side of the display. Now press Operation on the side of the display and set Operation to Save Image. ...

What operating system is used on the MSO5000/DS7000/MSO8000 series scopes?

Posted on: December 16th, 2020 by Doug Lovell

How long will the MSO8000 Capture a Signal

Posted on: December 16th, 2020 by Doug Lovell

16/12/2020
To determine how long an oscilloscope will capture a signal when it is operated in single trigger mode is determined by taking the instrument's memory depth and dividing it by the instrument's sample rate. The memory depth can be changed within the instrument's acquire menu and then the sample rate can be changed by adjusting the horizontal scaling. The t...

Sub Categories

Application Notes

Knowledge Base AC Power Supplies

Knowledge Base PCR-LE Series (3)

Knowledge Base PCR-MA Series (3)

Knowledge Base PCR-WE/WE2 Series (3)

Knowledge Base Data Acquisition Systems

Knowledge Base M300 Series (2)

Knowledge Base DC Power Supplies

Knowledge Base DP700 Series (8)

Knowledge Base DP800 Series (26)

Knowledge Base PBZ Series (3)

Knowledge Base PMX-Multi Series (3)

Knowledge Base PWR-01 Series (3)

Knowledge Base SPD1000X (5)

Knowledge Base SPD3000X/X-E Series (6)

Knowledge Base Digital Multimeters

Knowledge Base DM3000 Series (21)

Knowledge Base SDM3000 Series (6)

Knowledge Base Digital Oscilloscopes

Knowledge Base DS1000 Series (46)

Knowledge Base DS2000 Series (36)

Knowledge Base MSO/DS7000 Series (35)

Knowledge Base MSO5000 Series (35)

Knowledge Base MSO8000 Series (32)

Knowledge Base SDS1000X-E Series (15)

Knowledge Base SDS2000X-E Series (15)

Knowledge Base SDS5000X Series (15)

Knowledge Base Electrical Safety Analysers

Knowledge Base TOS9300 Series (3)

Knowledge Base Electronic Loads

Knowledge Base DL3000 Series (2)

Knowledge Base PLZ-5W Series (3)

Knowledge Base PLZ-5WH Series (3)

Knowledge Base PLZ-5WH2 Series (3)

Knowledge Base SDL1000X Series (5)

Knowledge Base RF Signal Generators

Knowledge Base DSG800 Series (2)

Knowledge Base SSG3000X Series (4)

Knowledge Base Spectrum Analysers

Knowledge Base DSA800 Series (70)

Knowledge Base RSA3000 Series (32)

Knowledge Base RSA5000 Series (31)

Knowledge Base SSA3000X Plus Series (2)

Knowledge Base SSA3000X Series (15)

Knowledge Base SSA3000X-R Series (1)

Knowledge Base SVA1000X Series (13)

Knowledge Base Waveform Generators

Knowledge Base DG1000 Series (14)

Knowledge Base DG4000 Series (14)

Knowledge Base SDG1000X Series (10)

Knowledge Base SDG2000X Series (11)

Knowledge Base SDG6000X Series (11)

Knowledge Base SDG800 Series (10)

Product Categories

AC Power Supplies / Frequency Converters
DC Power Supplies
DC Electronic Loads
Test & Measurement
Safety Testers
EMC
Soldering Irons / Test Tools
Manufacturers
Rental

Service & Support

About
Contact
Newsletter
Service Returns Form
Returns Policy
Terms and Conditions
Privacy Policy
Shipping & Delivery
My account

Support, News & Events

Latest News
Future Events
Product Support
Blog

Copyright © 2024. All rights reserved by Telonic Instruments Ltd

Website operated by Jumping Giraffe Ltd. Jumping Giraffe Ltd is not responsible for content on external websites.