How to add measurements to the MSO5000, DS7000 and MSO8000

Posted on: December 16th, 2020 by Doug Lovell

Measurements can be added to the bottom of the display quickly and easily, or all measurements can be displayed at once.

To add measurements press “Measure” then press “Add” on the right side of the display. Now the Quick Measurement Menu appears.
You are able to change between the different categories by either pressing on the tabs in the menu or by changing the “Category” section on the menu on the right side of display. This will allow you to pick between vertical and horizontal measurements along with use the other comparison measurements and then analyze the signal.
You can change which channel is associated with the measurements by toggling between channel 1 and channel 2 by changing the source on the right side of the display

To show all measurements for one channel you can do this by pressing “Measure” and then “All Measure” and you can select to display either all of the measurements on channel 1 or channel 2.