Cost-Effective 18GHz Real Time Spectrum Analyser

£5845.00 (£7,014.00 inc VAT)

Available on back-order

Description


Aaronia Spectran V6 Eco100XA-18 Cost-Effective 6GHz Real Time Spectrum Analyser

Aaronia presents the SPECTRAN® V6 ECO, a real-time, high-performance, spectrum analyser and monitoring receiver designed to capture even the shortest signal transmissions. Its scanning speed and recording time are unrivalled. The analyser scans 6GHz in 2ms (3THz/s), making it the world’s fastest USB spectrum analyser.
Perfect for any RF problem
This spectrum analyser enables you to conquer almost any challenge. Whether it’s spectrum monitoring, RF and microwave measurements, Interference hunting, EMC testing or Wi-Fi and wireless network measurements, the SPECTRAN® V6 ECO is the ideal spectrum analyser for making reliable and fast measurements.
Compact and lightweight
The V6 ECO is ideal for measurements in both the field and in the lab. The included analysis software, RTSA-Suite PRO, transforms the V6 ECO into a fully-featured benchtop spectrum analyser. The V6 ECO offers a solution for almost every application.
Highlights

  • Frequency range: 9 kHz to 18 GHz
  • Power supply: Via USB (10W)
  • Scans 6 GHz in less than 2 ms (3 THz/s)
  • Unlimited, continuous, true 24/7 I/Q streaming
  • FFT-based POI up to TBD
  • I/Q-based POI up to TBD
  • Exceptional dynamic range with a 16-bit ADC at 2GSPS
  • sampling rate of 500 MSPS (16-bit dual 256 MSPS I/Q data)
  • FPGA: 930 GMAC/s
  • FFT rate: 960 million FFT points/s (120 million FFTs/s)
  • Stackable accessories
  • Compact and lightweight
  • Spectral analysis software “RTSA-Suite PRO” with regular updates
  • Fully remote controllable via platform-independent HTTP-based API
  • Native C++ SDK for Windows and Linux

Documentation

Specifications

V6-100XA-6V6-150XA-6V6-200XA-6V6-100XA-18V6-150XA-18
Frequency Range (min)9 kHz
Frequency Range (max)7.25 GHz (w/o WiFi6E extension 6 GHz)18 GHz18 GHz
Real-Time Bandwidth44 MHz44 MHz88 MHz60 MHz60 MHz
Sweep speed500 GHz/s500/3000 GHz/s500/3000 GHz500/3000 GHz500/3000 GHz
Signal Generator44 MHz60 MHz
I/Os1 Rx1 Rx & 1 Tx2 Rx1 Rx1 Rx & 1 Tx
SPECTRAN V6 ECO
Real-time bandwidth RxUp to 88 (2×44) MHz (via 1x USB)*
Real-time bandwidth Tx44 MHz (depends on version)
Max. power Rx+23 dBm
Max. power Tx+10 dBm
DANL (internal pre-amp on)Typ. -170 dBm/Hz
Amplitude accuracy (typ.)Typ. +/- 0,5 dB (compensated by FIR filter)
USB streaming connection1x USB 3.1 or USB 3.2 PD
USB bandwidthUp to 784 MBytes/s sustained throughput to PC (dual USB 3.0)
Frequency reference accuracy0,5 ppm (5 ppb via OCXO option)
With GPS Disciplined Time Base: 5 ppb (optional 200 ppt)
RBW (resolution bandwidth)62 mHz to 200 MHz
Measurement unitsOver 20 (e.g. dBm, dBμV, V/m, A/m, W/m², dBμV/m, W/cm²)
DetectorMin, Max, AVG, Peak, QPeak
Attenuator range50 dB / 70 dB (0,5 dB steps)
TracesOver 20 (e.g. ACT, AVG, MAX, MIN, QPEAK)
Measurement modesTrue IQ or Power/Frequency data
TriggerCursor, Measurement, Density
ADCDual 2GSPS 16 Bit
DAC2GSPS 14-Bit (16-Bit via oversampling)
GPSGPS/QZSS, GLONASS, BeiDou and Galileo (concurrent reception)
GPS synchronisation+/- 10ns timestamping in each data packet
External Frequency Reference Inputtyp. 10MHz, 3,5VRMS into 50 Ohm (SMB-connector)
FPGAXC7A200T-2
DSP processing930 GMACs
SDRAM2 GB
RF connectorsSMA (Rx,Tx), SMB (Trigger, Refclock, GPS, PPM). All 50 Ohms.
Temperature range (operation)0 °C to +50 °C (extended -40 to +75 °C)
Dimensions210 x 115 x 30 mm
Weight850 g
PowerUSB 3.2 Gen 1 Type-C PD 3.0
Power consumptionTypical 10 W
Country of originGermany
Recommended calibration interval2 years