TEKBOX TBCP1-200 10kHz to 200MHz RF Current Monitoring Probe
£280.57 (£336.68 inc VAT)
4 in stock (can be backordered)
Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)
-
Tekbox TBCP1_CAL RF Current Monitoring Probe Calibration Fixtures
£430
Optional Hardware Accessories
Documentation
Specifications | |
---|---|
Characterised frequency range | 10 kHz to 500 MHz |
Aperture diameter | 25 mm |
Outside diameter | 76 mm |
Height | 31mm |
Weight | 320g |
Connector type | N female |
Transfer impedance | 3 to 17 dBΩ |
Max. primary current (DC – 400 Hz) | 80 A |
Max. primary current (RF) | 3A |
Max. core temperature | 125 °C |
Frequency (MHz) | Transfer Impedance (dBΩ) | Frequency (MHz) | Transfer Impedance (dBΩ) |
---|---|---|---|
0.01 | 2.79 | 40 | 17.30 |
0.02 | 9.34 | 50 | 17.20 |
0.03 | 12.86 | 60 | 17.06 |
0.04 | 15.47 | 70 | 16.87 |
0.05 | 16.68 | 80 | 16.63 |
0.06 | 17.28 | 90 | 16.49 |
0.07 | 17.54 | 100 | 16.38 |
0.08 | 17.74 | 110 | 16.21 |
0.09 | 17.82 | 120 | 16.08 |
0.1 | 17.89 | 130 | 15.93 |
0.2 | 17.96 | 140 | 15.77 |
0.3 | 17.96 | 150 | 15.61 |
0.4 | 17.93 | 160 | 15.43 |
0.5 | 17.91 | 170 | 15.28 |
0.6 | 17.87 | 180 | 15.08 |
0.7 | 17.85 | 190 | 14.77 |
0.8 | 17.82 | 200 | 14.41 |
0.9 | 17.81 | 210 | 13.93 |
1 | 17.78 | 220 | 13.36 |
2 | 17.62 | 230 | 12.71 |
3 | 17.55 | 240 | 12.01 |
4 | 17.57 | 250 | 11.38 |
5 | 17.52 | 260 | 10.82 |
6 | 17.51 | 280 | 10.19 |
7 | 17.47 | 300 | 10.03 |
8 | 17.46 | 350 | 9.47 |
9 | 17.44 | 400 | 8.27 |
10 | 17.43 | 450 | 6.88 |
20 | 17.33 | 500 | 5.08 |
30 | 17.32 |
1 review for TEKBOX TBCP1-200 10kHz to 200MHz RF Current Monitoring Probe
Only logged in customers who have purchased this product may leave a review.
David H –
The probe, as usual with all TEKBOX products, was well made and presented. The cost is way down on anything comparable. Only down side if any is that it is not a split type so the cables must be passed through it, for me this is no problem.
If you need to pass a typical IEC cordset through it, the IEC connector will need trimming down slightly to pass through.
Performing very well and together with FastPass EMC tips it is giving excellent results.