Microtest 6621-1 Bench LCR Meter 10Hz to 1MHz

. (£ inc VAT)

Available on back-order

SKU: Microtest6621-1 Categories: , , Brand:

Description


Microtest 6621-1 Bench LCR Meter

The Microtest 6621-1 Bench LCR Meter, part of the MICROTEST 6621 Series LCR Meters, offers a broad frequency range, from 10Hz to 30MHz, which is ideal for measuring the impedance characteristics of various components and materials. This versatile device provides a comprehensive set of measured parameters, including impedance (|Z|), admittance (|Y|), phase angle (θ), reactance (X), resistance (R), conductance (G), susceptance (B), inductance (L), dissipation factor (D), quality factor (Q), DC resistance (DCR), capacitance (C), and equivalent series resistance (ESR). Furthermore, it supports a wide array of communication interfaces such as REMOTE, Handler, LAN, USB Host, USB Device, GPIB, and RS-232, ensuring seamless compatibility with automation equipment or human-machine interfaces (PLCs).

Key Features

    • Frequency range: DC, 10Hz to 1/3/5/10/20/30MHz
    • Output Impedance 25Ω/100Ω, switchable
    • Ultra-high measuring speed <3ms
    • Basic accuracy up to ±0.05%
    • Automatic Level Control Function
    • Open circuit/Short circuit/Load Correction Function
    • Built-in DC Bias Voltage ±12V (Option OP-662102)
    • External DC Bias Current Source (Option 6621+ Series)
    • Support Meter Mode and List Mode
    • Display 4 Sets of Parameters at Once
    • Simultaneous AC/DC Measurement
    • Comparator Function and Handler BIN Classification Function
    • Support RS-232/ Handler/ LAN/ USB Host/ USB Device interfaces
    • Supports GPIB Interface (Option OP-662101)
    • Store Setup Files, Measurement Data, and Screenshots via USB
    • Supports PC Software

Applications

Measurement Units Explained
μʹ / μʹʹ: relative permeability (magnetic properties) εʹ / εʹʹ: dielectric constant (electrical storage)
Ls / Lp: series / parallel inductance Q / Qm: quality factor / mechanical quality
SRF: self-resonant frequency I sat / I rms: saturation / continuous current
Cs / Cp: series / parallel capacitance D: dissipation factor (energy loss)
ESR / DCR / Rs: equivalent series / DC / series resistance C-V: capacitance vs voltage
Z: impedance Cgd / Cgs / Cds: MOSFET capacitances
Fp / Kp: resonance frequency / coupling factor DC Bias: effect of DC voltage on capacitance
Application Measurement
Magnetic material μʹ / μʹʹ
Dielectric / ceramics εʹ / εʹʹ
Voice coil motor Ls / Q / Qm / SRF
Hearing aids Ls / Q / Qm / SRF
Piezoelectric element Cs / Cp / D / Fs / Fp / Kp
Quartz crystal Cs / Cp / D / Fs / Fp / Kp
Wireless charging Ls / Q / SRF / DCR / Rs
NFC / RFID Ls / Q / SRF / DCR / Rs
Battery ESR / Cs / Cp / D
MLCC Cs / Cp / D / Q / ESR / DC Bias
Capacitance Cs / Cp / D / Q / ESR / DC Bias
Diode Cs / Cp / D
Inductance Ls / Lp / Q / SRF / I sat / I rms
Wafer C-V
LED Light board Z / Cs / Cp / D
MOSFET Cgd / Cgs / Cds

Documentation

MODEL FREQUENCY
6621-1 10HZ-1MHz
6621-3 10HZ-3MHz
6621-5 10HZ-5MHz
6621-10 10HZ-10MHz
6621-20 10HZ-20MHz
6621-30 10HZ-30MHz
SERIES 6621
Freq Range 10Hz-30MHz
Freq Setting Continuity
Freq Resolution ±0.01%
Freq Output Accuracy 100mHz, 6-bit Frequency Input
Basic Accuracy typical ±0.05%
AC Drive Level Test Signal Voltage Level 10mV – 2Vrms(100Ω)
10mV – 1Vrms(25Ω)
Voltage Minimum Resolution 1mV
Accuracy ALC ON:6%* Voltage ±2mV
ALC OFF:10% * Voltage ±2mV
Test Signal Current Level 200µA – 20mArms
Current Minimum Resolution 10µA
Accuracy ALC ON:6%* Current ± 20µA
ALC OFF:10% * Current ± 20µA
DC Drive Level 1V (fixed)
Output Impedance 25Ω/100Ω (switchable)
Measurement Mode Meter mode, list mode
Measurement Parameters |Z|、|Y|、θ、X、R、G、B、L、D、Q、DCR、C
Test Time (Fastest) < 3mS

Note*

Specifications are liable to change. For the full list of Specifications, please see the product’s datasheet located under the ‘Documentation’ tab.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Mandatory Accessories …

Optional Accessories …