Sample Mode | Real-Time Sample Rate |
Real-Time Sample Rate | Analogue channel: 1 GSa/s (single-channel), 500 MSa/s (dual-channel), 250 MSa/s (three/four-channel) Digital channel: 1 GSa/s (8-channel), 500 MSa/s (16-channel) |
Peak Detect | Analogue channel: 4 ns Digital channel: 4 ns |
Averaging | After all the channels finish N samples at the same time, N can be 2, 4, 8, 16, 32, 64, 128, 256, 512 or 1024. |
High Resolution | 12 bit (max.) |
Interpolation | Sin(x)/x (optional) |
Minimum Detect Pulse Width | Digital channel: 10 ns |
Memory Depth | Analogue channel: 24 Mpts (single-channel), 12 Mpts (dual-channel), 6 Mpts (three/four-channel) Digital channel: 24 Mpts (8-channel), 12 Mpts (16-channel) |
Input | |
---|
Number of Channels | DS1XX4Z Plus/1XX4Z-S Plus: 4 analogue channels, 16 digital channels available after upgrade DS1054Z: 4 analogue channels |
Input Coupling | DC, AC or GND |
Input Impedance | Analogue channel: (1 MΩ±1%) || (15 pF±3 pF) Digital channel: (100 kΩ±1%) || 8 pF±3 pF) |
Probe Attenuation Coefficient | Analogue channel: 0.01X to 1000X, in 1-2-5 step |
Maximum Input Voltage (1MΩ) | Analogue channel: CAT I 300 Vrms, CAT II 100 Vrms, transient overvoltage 1000 Vpk Digital channel: CAT I 40 Vrms, transient overvoltage 800 Vpk |
Horizontal | |
---|
Timebase Scale | 5 ns/div to 50 s/div |
Maximum Record Length | 24 Mpts |
Timebase Accuracy | ≤ ± 25 ppm |
Clock Drift | ≤ ± 5 ppm/year |
Maximum Delay Range | Negative delay: 1/2 (Memory Depth/Sample Rate) Positive delay: 1 s to 500 s |
Timebase Mode | YT, XY, Roll |
Number of X-Y’s | 1 |
Waveform Capture Rate | 30,000 wfms/s (dots display) |
Zero Offset | ±0.5div*minimum time base scale |
Vertical | |
---|
Bandwidth (-3dB) | DS1104Z Plus/1104Z-S Plus: DC to 100 MHz DS1074Z Plus/1074Z-S Plus: DC to 70 MHz DS1054Z: DC to 50 MHz |
Single-shot Bandwidth | DS1104Z Plus/1104Z-S Plus: DC to 100 MHz DS1074Z Plus/1074Z-S Plus: DC to 70 MHz DS1054Z: DC to 50 MHz |
Vertical Resolution | Analogue channel: 8 bits Digital channel: 1 bit |
Vertical Scale (Probe ratio is 1X) | 1 mV/div to 10 V/div |
Offset Range (Probe ratio is 1X) | 1 mV/div to 499 mV/div: ± 2 V 500 mV/div to 10 V/div: ± 100 V |
Bandwidth Limit | 20 MHz |
Low Frequency Response (AC coupling, -3dB) | ≤5 Hz (on BNC) |
Calculated Rise Time | DS1104Z Plus/1104Z-S Plus: 3.5 ns DS1074Z Plus/1074Z-S Plus: 5 ns DS1054Z: 7 ns |
DC Gain Accuracy | <10 mV: ±4% full scale ≥10 mV: ±3% full scale |
DC Offset Accuracy | ±0.1 div ± 2 mV ± 1% offset |
Channel to Channel Isolation | DC to maximum bandwidth: >40 dB |
Trigger | |
---|
Trigger Level Range | ±5 div from the centre of the screen |
Trigger Mode | Auto, Normal, Single |
Holdoff Range | 16 ns to 10 s |
High Frequency Rejection | 75 kHz |
Low Frequency Rejection | 75 kHz |
Trigger Sensitivity | 1.0 div (below 5 mV or noise rejection is enabled) 0.3 div (above 5 mV and noise rejection is disabled) |
Edge Type | Rising, Falling, Rising/Falling |
Pulse Condition | Positive Pulse Width (greater than, lower than, within specified interval) Negative Pulse Width (greater than, lower than, within specified interval) |
Pulse Width | 8 ns to 10 s |
Pulse Width Condition | None, >, <, <> |
Polarity | Positive, Negative |
Pulse Width Range | 8 ns to 10 s |
Windows Type | Rising, Falling, Rising/Falling |
Trigger Position | Enter, Exit, Time |
Windows Time | 8 ns to 10 s |
Edge Type | Rising, Falling |
Idle Time | 16 ns to 10 s |
Edge Number | 1 to 65535 |
Slope Condition | Positive Slope (greater than, lower than, within specified interval) Negative Slope (greater than, lower than, within specified interval) |
Time Setting | 8 ns to 10 s |
Signal Standard | NTSC, PAL/SECAM, 480P, 576P |
Pattern Setting | H, L, X, Rising, Falling |
Edge Type | Rising, Falling |
Delay Type | >, <, <>, >< |
Delay Time | 8 ns to 10 s |
Edge Type | Rising, Falling, Rising/Falling |
TimeOut Value | 16 ns to 10 s |
Pattern | H, L, X |
Trigger Condition | >, <, <> |
Duration Time | 8 ns to 10 s |
Edge Type | Rising, Falling |
Data Pattern | H, L |
Setup Time | 8 ns to 1 s |
Hold Time | 8 ns to 1 s |
Polarity | Normal, Invert |
Trigger Condition | Start, Error, Check Error, Data |
Baud Rate | 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps, 230400 bps, 460800 bps, 921600 bps, 1 Mbps and User |
Data Bits | 5 bits, 6 bits, 7 bits, 8 bits |
Trigger Condition | Start, Restart, Stop, Missing Ack, Address, Data, A&D |
Address Bits | 7 bits, 8 bits, 10 bits |
Address Range | 0 to 127, 0 to 255, 0 to 1023 |
Byte Length | 1 to 5 |
Trigger Condition | Timeout, CS |
Timeout Value | 16 ns to 10 s |
Data Bits | 4 bit to 32 bit |
Data Line Setting | H, L, X |
Measure | |
---|
Cursor | Manual mode: Voltage deviation between cursors ( △V ) Time deviation between cursors ( △T ) Reciprocal of △T (Hz) (1/ △T ) Track mode: Voltage and time values of the waveform point Auto mode: Allow to display cursors during auto measurement |
Auto Measurement | Analogue channel: Period, Frequency, Rise Time, Fall Time, Positive Pulse Width, Negative Pulse Width, Positive Duty Cycle, Negative Duty Cycle, tVmax, tVmin, Positive Rate, Negative Rate, Delay 1→2 , Delay 1→2 , Phase 1→2 , Phase 1→2 , Maximum, Minimum, Peak-Peak Value, Top Value, Bottom Value, Amplitude, Upper Value, Middle Value, Lower Value, Average, Vrms, Overshoot, Pre-shoot, Area, Period Area, Period Vrms, Variance Digital channel: Period, Frequency, Positive Pulse Width, Negative Pulse Width, Positive Duty Cycle, Negative Duty Cycle, Delay 1→2 , Delay 1→2 , Phase 1→2 , Phase 1→2 |
Number of Measurements | Display 5 measurements at the same time |
Measurement Range | Screen or cursor |
Measurement Statistic | Average, Max, Min, Standard Deviation, Number of Measurements |
Counter | Hardware 6 bits counter (channels are selectable) |
Display | |
---|
Display Type | 7.0 inch TFT LCD display |
Display Resolution | 800 horizontal × RGB × 480 vertical pixel |
Display Colour | 16 million color (24 bit true color) |
Persistence Time | Min, 100 ms, 200 ms, 500 ms, 1 s, 5 s, 10 s, Infinite |
Display Type | Dots, Vectors |
I/O | |
---|
Standard Ports | USB Host, USB Device, LAN, AUX Output (TrigOut/PassFail) |
General Specifications | |
---|
Output Voltage | About 3 V, peak-peak |
Frequency | 1 kHz |
Power Voltage | 100 V to 240 V, 45 Hz to 440 Hz |
Power | Maximum 50 W |
Fuse | 2 A, T degree, 250 V |
Temperature Range | Operating: 0℃ to +50℃ Non-operating: -40℃ to +70℃ |
Cooling Method | Fan cooling |
Humidity Range | 0℃ to +30℃ : ≤95℃ relative humidity, +30℃ to +40℃ : ≤75℃ relative humidity, +40℃ to +50℃ : ≤45℃ relative humidity |
Altitude | Operating: under 3,000 meters, Non-operating: under 15,000 meters |
Dimensions | Width × Height × Depth = 313.1 mm × 160.8 mm × 122.4 mm |
Weight | Without package 3.2 kg ± 0.2 kg, With package 3.8 kg ± 0.5 kg |
Calibration Interval | The recommended calibration interval is 18 months. |
bogdan.deac (verified owner) –
Great scope. For the price I must say that is a best buy. It came with all functions unlocked. Fast delivery and great support from Telonic.
martins (verified owner) –
Good scope at a good price, delivered overnight using standard free delivery option.
John J –
Great scope for my budget.
Slightly heavier than expected.
Thanks Telonic!
John –
I ordered the scope at 2.30 in the afternoon using the standard free delivery. It arrived before 10.00 am next morning.
The scope is extremely good value for money.
NcQ –
Nice piece of kit at a good price delivered quickly and without fuss.
Trevor M –
Excellent product and great service, how they do it for the price is unbelievable.
G D –
Delivery prompt, packing good.
Scope appears very good and easy to use, given the large range of features.
Two suggestions for improvement:
1. Multi-function knob too sensitive – difficult to press to select without rotating enough to change selection.
2. Manual is 258 pages and does not cover every menu option. There are several layers of menus, so it is difficult to find particular options from memory. A “”menu tree”” poster would be very useful.
Kevin G –
My first modern scope. Brought this to replace my ancient Tektronix 2211, that finally died. It’s amazing value, and does everything I need, with plenty of additional features I’ll likely never need. A lot smaller than expected too!
Anonymous –
If your are in the market for a 4 channel oscilloscope at this price point, the DS1054z is
pretty much out on its own. Probably more features than I will ever use. Highlights include
numerous trigger options including some useful SPI and I2C modes. Very large 24M samples capture buffer
and a large and bright screen. Display is a bit busy although having the measurement options
permanently on the rleft hand side of the screen is definitely useful. The controls can be a bit fiddly but
everything is very well laid out.
Fast 24 hour delivery by Telonic for no extra charge.
Andrew A –
The perfect accompaniment to my two CRT based Scopes. I am all set up.
Thank you Telonic.
Anonymous –
Cracking good little DSO.
Well priced & excellent next day delivery from Telonic.
Very good all round.
Tony V –
Good web site, UK based company! Lots of choice and lots of information, easier than most to make a selection and competitive on price. Free delivery the day after ordering within half an hour of the delivery window starting. My first digital scope, instruction book downloaded from Telonic well written and easy to understand. The scope is now in active use!
F R –
Pretty good purchase compared to alternatives. It would benefit from a few minor improvements (response to user inputs could be snappier, sampling rate for “history” of measurements could be higher) but overall it’s a very capable instrument.
John O –
As a hobbyist and a complete beginner with oscilloscopes, I was hoping to find something that would do most things but at a bargain price! This scope will no-doubt be more than capable. It is well made, packed with features and fairly easy to figure out. Highly recommended.
Ken G –
Four channel digital storage scope with a 50MHz bandwidth, with colour display. Huge number of facilities on the scope including FFT so you can use it as a limited spectrum analyser, yet to explore fully. With automatic signal analysis of a chosen displayed signal taking the work out of measurements. Each channel control, sensitivity and trace position of all four channels is selected with buttons and then the relevant rotary control is used, needs a little getting used to. Updating of screen is a little slow using the position control, but perfectly usable.
Many facilities on the scope make it worth it’s price tag.
John T –
Loads of features for so little.
PDI check by Telonic , fast delivery and ease of use so it is up and running straight out of the box.
Anonymous –
An excellent product, fast delivery and a good price.
Thanks again to Telonic
Jonathan P –
This is a great 4 channel DSO for the price. The only things that could be implemented better are the multifunction rotary encoder and the noisy fan. The encoder jumps to the next setting when pushing it to select the option. I suppose it is just very sensitive and I will have to get used to it with my ham fists. The fan can be replaced easily. The service offered by Telonic was great and the DSO was delivered next day before 12:00 free of charge.
Gavin G –
Grate scope at a very good price. happy with my purchase and the quick delivery time, Thanks
Rory T –
Good price, well packaged and it arrived in Scotland from South England the next day.
Francis –
Fantastic product and great service from Telonic. Next day delivery before midday as promised
Paul C –
The whole process was straightforward and delivered promptly
Steve P –
Purchased this oscilloscope for home electronic repairs – have used scopes professionally, costing many times more, yet the features and performance of this Rigol still impress! It feels well built, the screen is bright, information clear and it does not take long to get up to speed with the controls. What more could you ask for in a sub £400 4 channel oscilloscope?!
Simon J –
Prompt delivery, I will use again.
Fred S –
Wow, all this for under £300.
Not sure how they make any money on this….
Rodney C –
Was pleased to find Telonic had stock, Nice scope, great performance and an even better price. Very Happy.
Dave J –
Opted for the Rigol DS1054Z Oscilloscope after watching positive reviews on my namesakes Dave Jones eev blog.
Telonic have been around for years and they also helped me with a frequency converter requirement.
John F –
This is a great oscilloscope and well worth the money in fact i was surprised how cheap it was.
Have dealt with Telonic for many years now and they always provide a good service.