Single Phase Voltage: 0-310V (AC), 0-±438V (DC) Current: 5A to 40A | Power: 500VA to 4kVA
Single Phase/Three Phase Voltage: 0 – 320Vrms AC Current: 5A to 360A | Power: Up to 36kVA
Single Phase/Three Phase Voltage Range: 0-320V Frequency Range: 1-5kHz | Power: 6kVA to 36kVA
Click here to see AC Power Supplies available to rent.
Click here to see all Offers & Promotions on AC Power Supplies
Voltage: 0-15V to 0-300V Current: 0-0.45A to 0-10A Power: 150W/300W
Voltage: 0-7.5V to 0-400V Current: 0-2A to 0-80A Power: 800W
Voltage: 0-15V to 0-400V Current: 0-4A to 0-100A Power: 1500W
Voltage: 0-18V to 0-660V Current: 0-5.5A to 0-220A Power: 3300W LAN, Digital I/O*, Iso Analogue*, Master Slave*, RS232*, RS485*, RS422*, USB*
Voltage: 0-15V to 0-600V Current: 0-10A to 0-400A Power: 6000W
Voltage: 0-70V to 0-1500V Current: 0-±30A to 0-±450A Power:15kW LAN, Digital I/O*, Iso Analogue*, Master Slave*, RS232*, RS485*, RS422* USB*
Voltage: 0-50V to 0-1500V Current: 0-30A to 0-800A Power: 20kW
Voltage: ±10V to ±80V Current: ±5A to ±100A Power: 20kW
Voltage: 0-18V to 0-500V Current: 0-0.1A to 0-5A Power: 36W to 105W
Output Voltage: 0-6V to 0-32V Output Current: 0-2A to 0-5A Power: 700VA to 900VA
Voltage: 0-40V to 0-650V Current: 0-1.85A to 0-200A Power: 400W to 2000W Analogue, USB, LAN, RS232 12 Models
Voltage: 0-30V to 0-650V Current: 0-7A to 0-150A Power: 750W to 1500W
Voltage 0-100V to 0-200V Current 0-25A to 0-50A Power 1500W
Voltage: 0-15V to 0-1500V Current: 0-4.7A to 0-2100A Power:3kW to 63kW
Voltage: 0-500V to 0-1500V Current: 0-30A to 0-120A Power: 20kW
Voltage: 0-30/50V Current: 0-5A Power: 150W
Voltage: 0-8V to 0-60V Current: 0-3A to 0-10A Power: Up to 220W
Voltage: 0-16/30V Current: 0-5/8A Power: 128/150W
Voltage: 0-32V Current: 0-3.2A Power: 220W
Voltage: 0-12V to 0-32V Current: 0-1A to 0-10A Power: 240W to 400W
Voltage: 0-40V to 0-160V Current: 0-7.5A to 0-90A Power: 360W to 360W*3
Click here to see DC Power Supplies available to rent.
Click here to see all Offers & Promotions on DC Power Supplies
Input Voltage: 0-150V to 0-200V Input Current: 40A/60A/70A Power: 200W/350W/450W
Input Voltage: 1-150V Input Current: 0-30A Power: 200W/300W
Input Voltage: 0-150V Input Current: 0-100A Power: 70, 150W
Input Voltage: 0.25-150V Input Current: 0-21600A Power: 200, 400, 1200 to 10800W
Input Voltage: 0.25-150V Input Current: 0-21600A Power: 200, 400, 1200
Input Voltage: 10-1000V Input Current: 0-400A Power: 1kW – 20kW
Voltage: 0-70V to 0-1500V Current: 0-±30A to 0-±9000A Power: 15kW to 300kW
Voltage: 0-70V to 0-1500V Current: 0-±30A to 0-±450A Power: 15kW
Voltage: 10V-500V to 30V-1500V Current: 30A to 120A Power: 20kW
Click here to see Electronic Loads available to rent.
Click here to see all Offers & Promotions on Electronic Loads
Bench and Handheld Oscilloscopes Bandwidths From 50MHz to 13GHz
All of Our Available Oscilloscope Probes
Kikusui Battery Impedance Meters 300V/1000V Max.
Bench and Handheld Spectrum Analysers Test Freq From 1.5GHz to 26.5GHz
Bench and Handheld Vector Network Analysers Max. Frequency From 9kHz to 26.5GHz
Brymen Clamp-On Multimeters DC 600V / 1000V Max. AC 1000V Max.
Precision Current Transducers up to 10000A / 7000Arms Data Loggers / DAQ Handheld and Bench Data Loggers
Graphtec Data Loggers and Rigol Data Acquisition Systems
Bench and Handheld DMM Up to 6.5 digits
Frequency: 10MHz to 1GHz Channels: 1/2/4/8 Sample Rate: 125MSa/s to 5GSa/s
Maximum Frequency: 1.5GHz to 40GHz Range: -140 dBm to +30 dBm Phase Noise: -135 dBc/Hz to -110 dBc/Hz @ 1 GHz, 20 kHz offset
Frequency: 9 kHz-9 GHz/ 100 kHz-26.5 GHz 2/4 Inputs | 6/12/24 Outputs DC Voltage: 35V
Brymen Handheld Multimeters Digits: 3-5/6
Test Frequency: 10Hz – 50MHz Basic Accuracy: ±0.08% (typical ±0.05%) Output Impedance: 25Ω/100Ω, switchable (Nominal value)
Microtest/Sourcetronic LCR Meters Test Frequency: 1mHz-50MHz Basic Accuracy: ±0.05%
Frequency: 45Hz – 440Hz Power Supply: Voltage 100 ~ 240Vac, Frequency 50/60Hz Bandwidth: DC 15Hz ~ 100kHz
Minimum Resolutions: 10fA, 10nV Maximum Voltage: ±21V, ±210V Voltage Range: 20mV to 200V
Microphone and Amplifiers | Sound Level Meters / Calibrators Accelerometers, | Vibration Meters | Laser Doppler Vibrometers
Cell Cyclers and Battery Impedance Testers by KIKUSUI
Accessories for Test and Measurement Units
Click here to see Test & Measurement units available to rent.
Click here to see all Offers & Promotions on Test & Measurement
Frequency: 150kHz – 3GHz Power Output: 150mW – 25W Gain: 22dB – 48 dB
Tekbox Antennas 9kHz-3GHz Noiseken Broadband Sleeve 700MHz-8GHz Aaronia Antennas
Tekbox & Telonic Berkeley Attenuation / Termination Sets 3GHz, 10W-100W, 3dB-30dB
EMI Analyser, Spectrum Analyser, Tracking Analyser, Oscilloscope, Demodulator, IQ Stream Gen. and Remote Control
Frequency: 5kHz to 6GHz Reference for Radiated/Conducted Emissions Switchable Comb Frequencies
Suppress Interference from Ambient Noise when Carrying Out Pre-Compliance Measurements. Conductive Fabrics / Velcro Tape Seal
Impedance: 1μH//50Ω to 150Ω (Standard V-Network is 50μH+5Ω//50Ω) Frequency: 30 Hz to 500 MHz | Current: 250 mA to 100 A
The probes serve to locate and identify potential sources of interference within the building blocks of electronic assemblies
Wide Range of RF Cables including RG58, RG316U, RG223 and RG142. BNC, N-Type, SMA, SMB
Freq: 1kHz-1GHz 3dB Bandwidth: 30kHz-1GHz Trans-Impedance: Up to 20 dBΩ
Bulk Current Injection Probes (BCI Probes) by TEKBOX Designed for IEC61000-4-6 and ISO 11452-5
A TEM cell is a strip line device for radiated emissions and immunity testing of electronic devices. It is not a replacement, but due to its size and cost it is a convenient alternative to measurements in an anechoic chamber
The Tekbox EMC compliance software EMCview for PCs is a user-friendly EMC pre-compliance testing of radiated and conducted emissions. It is a perfect complement for automated testing using our LISNs, RF current probes, measurement antennas and TEM Cells.
Explore Tekbox CDNs 16Amp-36Amp 150KHz-300MHz
Wideband injection transformers for control loop stability measurements. It provides galvanic isolation between the swept signal source and the control loop.
ESD Simulators (Electrostatic Discharge Simulators), often referred to as ESD Guns, are specialised electronic test instruments used primarily in EMC testing.
Used to perform the EFT/Burst immunity test, as specified in international standards like IEC 61000-4-4 (and its European equivalent EN 61000-4-4), which is mandatory for CE marking in the EU/UK.
Emission Measurement Equipment refers to scientific tools used to detect and quantify gaseous and solid pollutants released from sources like vehicle exhausts and industrial smokestacks.
Accessories for EMC/RC Units
Click here to see EMC Pre-Compliance units available to rent.
Click here to see all Offers & Promotions on EMC Pre-Compliance
5kV / 100mA (500VA) AC withstand Voltage High-precision measurement ± 1.5% of reading USB, RS-232C interface equipped
0.05 kV to 5.00 kV ±(2 % of set + 20 V) when no load is connected Up to 500 VA (5 kV/100 mA)
AC withstand voltage test at 5 kV / 100 mA (500 VA) Insulation resistance test: 25 V to 1000 V High precision measurement ± 1.5% of reading
AC/DC Earth Continuity testing up to 40A 7.2kV/100W DC HiPot Test User-friendly 10Key configuration
Supports 10 kV AC/DC high-voltage safety testing Ideal for SiC power devices, high-voltage inverters, and PV panels
Measurement range insulation resistance testing: 0.001MΩ to 100.0GΩ (DC -25V to -1000V / DC +50V to +7200V)
AC/DC Earth Continuity testing up to 40A 7.2kV/100W DC Hipot Test LAN/USB/RS232C Standard Digital Interface
0-6VAC | 3-30A/6-60A Test current value: 6 to 62 A AC / Resistance value: 0.001 to 0.600 ohm
-25 V to -1000 V Range Accuracy: ±(1.5 % of setting + 2 V)
Range of leakage current testing: 1μA to 100mA(rms) Output voltage and panel settings are controlled through LAN/USB/RS232C
Output: 10V-1200V to 200V-10000V 200MHz/9bit High Impulse Test Sampling Rate Lowest Inductance (≥0.1μH)
Click here to see Safety Testers available to rent.
Click here to see all Offers & Promotions on Safety Testers
Atten & JBC Soldering Irons Up to 100W Bundles Available
Circuit Boards, Mounting, Probes, and many more testing solutions for Soldering, Inspection and Hands-Free measurements
Click here to see Soldering Irons / Test Tools available to rent.
Click here to see all Offers & Promotions on Soldering Irons / Test Tools
Meatest’s Caliber and WinQbase Software for all your calibration and tracking needs!
Range: 1 MΩ – 12 GΩ Current: 8 mA – 120 A Maximum working voltage 5 kV DC
Voltage: 1000V-1050V Current: 20A-30A AC/DC Units Available
1F/3F Calibrators 15 – 1000 Hz output Resolution as good as 0.001 Hz
Designed for long-term reliability, Meatest calibrators feature a rugged construction and low temperature dependency — making them ideal for demanding industrial environments.
Resistance: 100 mΩ – 10 GΩ, 0 – 20 kHz ± 0.005% / year Capacitance: 10 pF – 100 uF, 20 Hz – 20 kHz ± 0.02% / year
Meatest decade boxes are designed for precision, reliability, and automation, making them an essential tool for calibration, testing, and educational applications. Unlike traditional models with mechanical knobs, our decade boxes utilize high-quality resistors and capacitors, with internal standards switched by relays controlled by an advanced algorithm.
Click here to see Calibration & Metrology Equipment available to rent.
Click here to see all Offers & Promotions on Calibration & Metrology
FREE SHIPPING £75+
CELEBRATING 50+ YEARS
PRICE MATCH GUARANTEE