SOURCETRONIC ST2830 LCR Meter

£1035.00 (£1,242.00 inc VAT)

Available on back-order

SKU: ST2830 Category:

Sourcetronic ST2830 LCR Meter

Features:

  • Frequency: 50Hz – 100kHz
  • Basic accuracy: 0.05%
  • Test parameters: |Z|, |Y|, C, L, D, Q, θ(DEG), θ(RAD), Δ%, DCR
  • 4.3″ TFT LCD-display
  • Interface: RS232, USB, HANDLER, GPIB (optional)
  • Measuring time: 13ms
  • Comparator function

Specification:

  • Soft power switch
  • Max. 100kHz test frequency
  • 6 digit reading resolution
  • 10mVrms-2.0Vrms programmable test level
  • DCR: 1V test level, resolution 10μΩ
  • DCR polarity configuration function, particularly for inductance test
  • Highest test speed 13ms/time
  • Selectable 30Ω/100Ω signal source impedance
  • V/I monitor
  • Built-in comparator, 10 bins sorting and count function
  • File storage and program update through U disk
  • RS232, USB, HANDLER, GPIB interface (optional)

Description


    Standard Hardware Accessories

Technical Specification
Model Name ST2830 ST2832
Basic Measurement Accuracy LCRZ: 0.05%
DCR: 0.1%
Calibration Condition: Warm up time: ≥ 30 s ; Environment temperature: 23±5ºC
Signal voltage: 0.3Vrms – 1Vrms ; Correction: after OPEN, SHORT
Testing cable length: 0 m
LCRZ: 0.05%
DCR: 0.1%
Calibration Condition: Warm up time: ≥ 30 s ; Environment temperature: 23±5ºC
Signal voltage: 0.3Vrms – 1Vrms ; Correction: after OPEN, SHORT
Testing cable length: 0 m
Test signal frequency 50Hz-100kHz
34 points
50Hz, 60Hz, 75Hz, 100Hz, 120Hz, 150Hz, 200Hz, 250Hz, 300Hz, 400Hz, 500Hz, 600Hz, 750Hz, 1kHz, 1.2kHz, 1.5kHz, 2kHz, 2.5kHz, 3kHz, 4kHz, 5kHz, 6kHz, 7.5kHz, 10kHz, 12kHz, 15kHz, 20kHz, 25kHz, 30kHz, 40kHz, 50kHz, 60kHz, 75kHz, 100kHz
20Hz-200kHz, 15025 points
Signal source output impedance Selectable 30Ω, 100Ω, ±1% @1kHz Selectable 30Ω, 100Ω, ±1% @1kHz
DCR test signal level 1V DC 50mV – 2V DC
Resolution: 0.5mV
DC bias voltage source 0V – ±5V
Resolution: 0.5mV,
Accuracy: 1%
0mA – ±50mA
Resolution: 0.5µA
Test parameters |Z|, |Y|, C, L, X, B, R, G, D, Q, θ, DCR |Z|, |Y|, C, L, X, B, R, G, D, Q, θ, DCR
DCR display range 0.00001Ω – 99.999MΩ 0.00001Ω – 99.999MΩ
LCR parameters display range |Z|, R, X 0.00001Ω — 99.9999MΩ
|Y|, G, B 0.00001μs — 99.9999s
C 0.00001pF — 9.99999F
L 0.00001μH — 99.9999kH
D 0.00001 — 9.99999
Q 0.00001 — 99999.9
θ(DEG) -179.999º — 179.999º
θ(RAD) -3.14159 — 3.14159
Δ% -999.999% — 999.999%
|Z|, R, X 0.00001Ω — 99.9999MΩ
|Y|, G, B 0.00001μs — 99.9999s
C 0.00001pF — 9.99999F
L 0.00001μH — 99.9999kH
D 0.00001 — 9.99999
Q 0.00001 — 99999.9
θ(DEG) -179.999º — 179.999º
θ(RAD) -3.14159 — 3.14159
Δ% -999.999% — 999.999%
Display digits 6 6
Measurement time (≥10 kHz) Fast: 75 meas/sec (13ms)
Medium 11 meas/sec 90 ms)
Slow: 2.7meas/sec 370 ms)
Fast: 75 meas/sec (13ms)
Medium 11 meas/sec 90 ms)
Slow: 2.7meas/sec 370 ms)
Equivalent circuit Serial, Parallel Serial, Parallel
Range mode Auto, Hold Auto, Hold
Trigger mode Internal, Manual, External, Bus Internal, Manual, External, Bus
Averaging 1 – 255 individual measurements 1 – 255 individual measurements
Correction Open, Short, (known) Load Open, Short, (known) Load
Math operation Direct reading, difference to set reference value as ΔABS, Δ% Direct reading, difference to set reference value as ΔABS, Δ%
Trigger delay time setting 0 – 60.000s, 1ms steps 0 – 60.000s, 1ms steps
Step delay time setting 0 – 60.000s, 1ms steps 0 – 60.000s, 1ms steps
List Sweep 10 points list sweep
Frequency, AC voltage/current, internal/ external bias voltage/current can be swept
Each sweep point can be sorted separately.
10 points list sweep
Frequency, AC voltage/current, internal/ external bias voltage/current can be swept
Each sweep point can be sorted separately.
Comparator function 10 bins, BIN1–BIN9, NG, AUX
Bin count function
PASS, FAIL front panel or scan fixture LED display
10 bins, BIN1–BIN9, NG, AUX
Bin count function
PASS, FAIL front panel or scan fixture LED display
Built-in Storage Internal 40 LCRZ instrument setting files, 201 times test results Internal 40 LCRZ instrument setting files, 201 times test results
USB Storage Instrument setting files , measurement result CSV files, screenshots (GIF format) Instrument setting files , measurement result CSV files, screenshots (GIF format)
Interface Control Interface: Handler
Communication Interface: USB DEVICE, RS232C, GPIB (option)
Storage Interface: USB HOST (U-disk storage)
Control Interface: Handler
Communication Interface: USB DEVICE, RS232C, GPIB (option)
Storage Interface: USB HOST (U-disk storage)

Note*

Specifications are liable to change. For the full list of Specifications, please see the products datasheet located under the ‘Documentation’ tab.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.