Kikusui TOS6210 Ground Bond Tester 0-6VAC 6-60A

£2709.00 (£3,250.80 inc VAT)

Available on back-order

SKU: TOS6210 Category:

Kikusui TOS6210 Safety Tester

The TOS6210 is a constant current AC Low Ohm tester, the TOS6210 tester extends the maximum test current from 30 A to 60 A, which is demanded by the new standard.
In addition, the tester also lets you judge the acceptability of the device under test based on the drop in voltage, as required in the standard. What’s more, you can preset test conditions of up to 20 different types of safety standards, such as those for information technology equipment, home appliances, medical devices, and measuring instruments, in the memory on the main unit’s panel.
A simple memory call operation allows you to set up a protective earthling or protective bonding continuity test as stipulated in UL60950-1 and other relevant specifications including IEC and JIS standards.
The TOS6210 also features a set of functions that meet the specific needs of testing personnel, such as an offset cancellation function and a memo function that allows you to input calibration dates, production numbers, and other test-related information and read the input information later via the GPIB or RS-232C interface.

Features:

  • Test current value: 6 to 62 A AC / Resistance value: 0.001 to 0.600 ohm
  • Voltage drop-based judgment function
  • Offset cancelling function
  • Stores 100 test conditions in memory
  • Incorporates test conditions into program
  • Contact Check function
  • Equipped with standard GPIB and RS-232C interfaces
  • Equipped with standard test lead (TL12-TOS)

Description


Documentation

TOS6210 Specifications
Model TOS6210
Output Block
Current Setting Range 6.0 to 62.0 A AC (With respect to resistance resulting in output power of the maximum rated Output or less and an output terminal voltage of 5.4 V or less)
Resolution 0.1A
Accuracy ± (1% of setting + 0.4A)
Maximum rated output 220 VA (at the output terminals)
Distortion factor 2% or less (with respect to 0.1 Ω pure resistance load of 20 A or greater)
Frequency 50/60 Hz, sine wave (selectable)
Accuracy ±200ppm
Open terminal voltage 6 Vrms or less
Output method PWM switching method
Output Ammeter
Measurement range 0.0 to 66.0 A AC
Resolution 0.1A
Accuracy ± (1% of reading + 0.4A)
Response Mean value response/rms value display (response time: 200 ms)
Holding function The current measured at the end of test is held during the PASS or FAIL inteval
Output Voltmeter
Measurement range 0.00 to 6.00 V AC
Resolution 0.01V
Offset Cancel Function 0.00 to 5.40 V (Offset ON/OFF function provided)
Accuracy ± (1% of reading + 0.02V)
Response Mean value response/rms value display (response time: 200 ms)
Holding function The voltage measured at the end of test is held during the PASS or FAIL inteval
Ohmmeter
Measurement range 0.001 to 0.600 Ω
Resolution 0.001 Ω
Offset cancel function 0.000 to 0.600 Ω (Offset ON/OFF function provided)
Accuracy ± (2% of reading + 0.003 Ω)
Holding function The resistance measured at the end of test is held during the PASS or FAIL interval
Environment
Operating environment Indoor use, Overvoltage Category II
Warranty range Temperature: 5° to 35°C

Humidity: 20 %rh to 80 %rh (non condensing)

Operating range Temperature: 0° to 40°C

Humidity: 20 %rh to 80 %rh (non condensing)

Storage range Temperature: -20° to 70°C

Humidity: 90 %rh or less (non condensing)

Altitude Up to 2000 m
Power Requirement
Allowable voltage range 85 to 250 V AC
Allowable frequency range 47 Hz to 63 Hz
Insulation resistance 30 MΩ min. (500 V DC), between AC line and chassis
Hipot 1390 V AC (2 seconds), between AC line and chassis
Ground Bond 25 A AC/0.1 Ω max.

Note* Specifications are liable to change. For the full list of Specifications, please see the products datasheet located under the ‘Documentation’ tab.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Mandatory Accessories …

  • UK Power Cord

    .
    Read more
  • Kikusui TL12-TOS Test Lead

    .
    Add to basket

Optional Accessories …

  • Kikusui RC01-TOS Remote Control Box

    £153.00
    Add to basket
  • Kikusui 408J-104 4m GPIB Cable

    £183.00
    Add to basket
  • Kikusui 408J-101 1m GPIB Cable

    £151.00
    Add to basket
  • Kikusui RC02-TOS Remote Control Box

    £180.00
    Add to basket
  • Kikusui TL12-TOS Test Lead

    £246.00
    Add to basket
  • Kikusui 408J-102 2m GPIB Cable

    £167.00
    Add to basket
  • Kikusui LP02-TOS Test Probe

    £278.00
    Add to basket