Description
Brymen BM785 Professional Multimeter
Brymen BM785 Professional Multimeter. 60,000 Counts, 7kHz TRMS and CAT-III 1kV Now Over-molded Ergonomic, AutoHold Real-Read, BeepLit Continuity, BeepLit Diode Alert, Hi-Lo EF Detection, VFD V & Hz, Crest Peaks, Speedy MaxMinAvg, Relative Zero and BeepJack.
Telonic Offer: Supplied with Silicone Test Leads with gold-plated tips with screw-on banana plugs (BL21S2-T4SC).
Features:
- ACV Bandwidth up to 7kHz
- 4-5/6 Digits 60,000 Counts max large easy-to-read LCD display
- Nominal 5/sec fast measurements; Fully auto-ranging
- 31 Segment Analogue bar-graph updates 50/sec
- Best basic DCV Accuracy up to 0.03%+2d
- Warm white back-lighted LCD display
- DC+AC, AC True RMS Conversion
- Intelligent Auto Power Off
- Data Hold
- Relative Zero Mode
- Crest (peak hold) captures MaxMin Changes > 0.25ms in durations
- Autohold Real-Read Shows real-time readings to avoid blind measurements
- Speedy record MaxMinAvg Readings; Updates 10/Sec Nominal on DC Measurements
- VFD-V & VFD-Hz Measures Fundamental V & Hz of most variable frequency drives
- DC, AC, DC+AC Voltage Ranges 600.00mV to 1000.0V
- DC, AC, DC+AC uA, mA & A Ranges 600.00uA to 10.000A
- Ohms Ranges 600.00Ω to 60.000MΩ
- Capacitance Ranges 10.00nF to 10.00mF
- Line Frequency Ranges 99.999Hz to 50.000kHz
- Logic Frequency Ranges 99.999Hz to 1.0000MHz
- BeepLit Continuity Tester. Features Audible Beep & Visible Backlight Effects
- BeepLit Diode Tester. Short-Beep Alert and Voltage threshold continuity
- BeepJack Input warning against improper plug into uAmA/A terminals
- Rugged fire retarded casing with battery compartment cartridge
- Over-molded protective holster with probe-holders and tilt-stand
- Optional purchase magnetic hanger strap
- HBC 1kV Fuses protected on uAmA/A Terminals
- Transient Protection up to 8kV 1.2/50us Lightning Surge
- LVD meets EN61010-1/-2-030/-2-033 to measurement CAT III 1000V & CAT IV 600V
- EMC meets EN61326-1
Brymen Handheld Multimeter Comparison Table
Model | Digits | Counts | DC Voltage / Current Range | AC Voltage / Current Range | OHMS Ranges | Line Level Frequency Range |
---|---|---|---|---|---|---|
BM235 | 3-5/6 Digits | 6,000 Counts | 600.0mV - 1000V | 600.0mV - 1000V | 600.0Ω - 60.00MΩ | 99.99Hz - 50.00kHz |
BM257s | 3-5/6 Digits | 6,000 Counts | 0.01mV - 1000V | 0.01mV - 1000V | 0.1Ω - 60MΩ | 10.00Hz - 10.00kHz |
BM785 | 4-5/6 Digits | 60,000 Counts | 600.0mV - 1000V | 600.0mV - 1000V | 600.00Ω - 60.000MΩ | 99.999Hz - 50.000kHz |
BM789 | 4-5/6 Digits | 60,000 Counts | 600.0mV - 1000V | 600.0mV - 1000V | 600.00Ω - 60.000MΩ | 99.999Hz - 50.000kHz |
BM867s | 5-4/5 Digits | 500,000 Counts | 0.001mV - 1000V | 0.01mV - 1000V | 0.01Ω - 50MΩ | 10Hz - 200kHz |
BM869s | 5-4/5 Digits | 500,000 Counts | 0.001mV - 1000V | 0.01mV - 1000V | 0.01Ω - 50MΩ | 10Hz - 200kHz |
BM877 | 3-5/6 Digits | 6,000 Counts | 60.00mV - 1000V | 60.00mV - 1000V | 600.0Ω - 60.00MΩ | --- |
BM878 | 3-5/6 Digits | 6,000 Counts | 60.00mV - 1000V | 60.00mV - 1000V | 600.0Ω - 60.00MΩ | --- |
BM887 | 3-5/6 Digits | 6,000 Counts | 60.00mV - 1000V | 60.00mV - 1000V | 60.00Ω - 60.00MΩ | 9.999Hz - 100.0kHz |
Darren H –
The price of a new Fluke 87v is a staggering £450, the 87v is a 6000 count meter with an accuracy of less than BM785 which sells for a little over £100.The Fluke 289 comes in with and accuracy of 0.025% and it is about the best that can be achieved for a hand held meter. Well, the BM785 boast’s 0.03% accuracy and 60000 counts, now that’s got to be good. It took me about 1/2 hour of using the BM785 to acquire 99% confidence levels.
These Brymen meters are good, I’m tempted to buy another.